UR3-J22TWM
Replacing Batteries
2
Before you program or operate the remote
control, you must install two new AAA
alkaline batteries.
STEP1 Remove the battery compartment
cover on the back of your remote
control.
STEP2 Check battery polarity carefully,
and install the batteries as shown
below.
STEP3 Replace the battery compartment
cover.
Install two
AAA alkaline batteries
as shown here
Operations
4
Default State :
Device Default: Motorola CFT2200
Volume Default : TV volume and mute
through the TV, with the option of
controlling volume and mute through the
Cable Converter. Refer to Section E for
programming the volume and mute through
your Cable Converter.
Universal Remote Control, Inc.
OEE-0035N Rev 07 (07/09/04)
|