PRO505XL
Professional Mobile CB Radio
© 2013 Uniden America Corp.
Irving, Texas
Printed in Vietnam
U01UT386ZZA(0)
Communications Act and with the rules of CB Radio Service. (For more
information on U.S. radio rules, visit the FCC website at www.fcc.gov.)
Uniden contact information
If You
Contact Uniden’s
Phone
have a question or problem Customer Care Line*
800-297-1023
800-554-3988
need a part or accessory
Parts Department*
need special assistance
due to a disability
800-874-9314
(voice or TTY)
Accessibility Help Line
*During regular business hours, Central Standard Time. Visit our website for detailed
business hours.
INCLUDED IN YOUR PACKAGE
If any of these items are missing or damaged, immediately contact your
place of purchase or Uniden’s Parts Department.
Microphone and hook
PRO505XL Mobile radio
Mounting bracket, knobs, and mounting hardware
► Other printed materials
NOTE: You must use a CB antenna (sold separately) with this radio.
3
PARTS OF THE RADIO
Front
2
1
5
6
7
4
3
No.
1
Name
Details
CB/PA
Switch
Switches between CB Radio and PA systems
2
Volume/
Power
Adjusts the volume.
Turns radio on and off.
3
4-Pin Mic
CH9
Plugs in microphone
4
Sets the radio to CH9 (Emergency).
5, 6
Channel
Selectors
Press or to select which channel the radio will transmit
or receive on.
7
Squelch
knob
Adjusts the level at which the radio squelches or suppresses
weak radio signals
NOTE: FCC rules reserve Channel 9 for motorist assistance and
other emergency communications. Channel 9 should only be used
in situations where there is immediate danger to the safety of
individuals or the protection of property.
Back
10
9
11
8
No. Name
Details
8
Antenna
Connector
Connects to a male PL-259 external antenna cable
(antenna sold separately).
9
PA Speaker
Jack
See Connecting external speakers, page 6.
10
External
Speaker Jack
See Connecting external speakers, page 6.
4
No. Name
11 12 Volt DC
Power Cord
Details
Connects to DC power supply, page 5.
Microphone
Press and hold the PTT button to transmit on
the selected channel. Release the button to listen
for a response.
Push-to-Talk
button
NOTE: For the best sound quality, hold the
microphone about 2 inches away from your
mouth and speak in a normal voice.
NOTE: Make sure you have read and understood part 95 of the FCC
rules and regulations before using the transmitter.
INSTALLATION
Connect the microphone
Align the microphone connector with the jack on the front of the radio.
Push the connector in firmly and secure it with the locking screw.
Connect the power
You can connect the radio to any standard 12 volt DC power source,
with either a positive or negative ground. If you don’t know whether
your power supply uses a positive or negative ground, consult the
manual for your power supply or contact the manufacturer.
WARNING! DO NOT connect this equipment to a power supply if you
are not absolutely certain of the grounding type!
1) Make sure your power supply is turned off.
2) For power supplies with a NEGATIVE ground, connect the RED
lead on the radio to the power supply’s POSITIVE (+) pole, and
connect the BLACK lead to the power supply’s NEGATIVE (–) pole
or to a neutral ground such as the chassis.
Turn on your power supply.
3) Turn the radio’s Volume knob clockwise to power on the radio.
Installing the mounting bracket
When choosing the location for the radio’s mounting bracket, keep the
following things in mind:
5
► Pick a location that does not block your view, interfere with your
vehicle’s controls, or hinder your driving.
► Make sure the radio and microphone are not in front of an airbag.
► Pick a solid surface that can support the bracket and radio weight.
► Make sure there’s enough room. (You may want to put the radio in
the bracket when you’re choosing where to install the bracket.)
Once you choose the location, use the included, self-tapping screws
to attach the mounting bracket and the microphone bracket to your
vehicle (you don’t have to drill holes). Slide the radio into the bracket
and use the included knobs to hold it at the preferred angle.
Connecting an external antenna
WARNING! The antenna used for this radio must be installed at least
8 inches (20 cm) away from all persons. The antenna must not be
collocated or used with any other antenna or transmitter.
CAUTION: Never operate your radio with no antenna or with a
damaged antenna cable. This can damage the radio.
You will need to purchase an antenna to operate the radio. There are
two basic types of mobile CB antennas–full-length whips and loaded
whips–with a wide variety of mounts to suit different vehicle locations.
► Choose an antenna that matches the specifications of this radio.
► Follow the manufacturer’s installation instructions carefully.
► Tune your antenna using a Standing-Wave Ratio (SWR) meter: set
the radio to channel 20, and adjust the antenna until the SWR is as
close as 1:1 as possible.
Connecting external speakers
Your radio supports two external speakers for remote monitoring and
public address features. External speakers are sold separately.
To prevent feedback, direct all speakers away from the microphone.
External monitor
PA speaker
Function
Remote receiver monitoring or
substitution for internal speaker
Public address broadcasts
Impedance
Rating
8 Ohms
3 Watts
8 Ohms
3 Watts
Connect to
EXT.SP. jack (⅛-in/3.5 mm) PA.SP. jack (⅛-in/3.5 mm)
6
External monitor
PA speaker
Notes
The internal speaker is disabled You must have a PA speaker
when an external speaker is
connected.
connected to use the PA
feature.
CAUTION: Make sure the SWR is less than 2:1 before using the
radio. An SWR higher than 2:1 can damage the transmitter.
Your Uniden dealer can help you select the antenna that is best for your
needs. Consult the specifications in the back of this manual for detailed
transmitter and antenna information.
OPERATION AND MAINTENANCE
Basic operation
Turning the
radio on
Turn the Volume knob clockwise until the display backlight
comes on.
Turning the
radio off
Turn the Volume knob counter-clockwise until it clicks and the
display backlight turns off.
Selecting a
channel
Press or buttons to select a channel.
Changing the
volume
Turn the Volume knob clockwise to increase the volume; turn it
counter-clockwise to decrease the volume.
– Tune the radio to the channel you want to transmit
on, and listen to make sure the channel is clear.
– Press and hold the PTT button.
– Hold the microphone about 2 inches away from
your mouth and speak in a normal voice.
– Release the button to listen for a response.
– Toggle the CB/PA switch to PA; this turns off the
CB radio and activates the PA speaker.
– On the microphone, press and hold the PTT
button.
Transmitting
Using the PA
feature
– Hold the microphone about 2 inches away from
your mouth and speak in a normal voice. Use
the Volume knob to adjust the volume of the PA
speaker.
– When you’re finished broadcasting, release the
button and move the CB/PA switch back to CB.
– To filter out weaker signals and background noise,
turn the knob clockwise to increase the squelch
level.
– To decrease the squelch level so you can hear
weaker radio signals, turn the knob counter-
clockwise.
Adjusting the
squelch level
7
– Press the CH9 button; the radio automatically
tunes to channel 9.
– Press the CH9 button again to return to the
previous channel.
Using the Instant
Channel 9
feature
NOTE: Make sure you read and understood part 95 of the FCC rules
and regulations before using the transmitter.
Maintenance
Every six to twelve months, check to make sure that...
► The Voltage Standing Wave Ratio (VSWR) is less than 2:1.
► All electrical connections are secure and free of corrosion.
► The antenna cable shows no wear or damage.
► All mounting screws are securely fastened.
TROUBLESHOOTING
If your radio is not performing to your expectations, please try these
simple steps. If these steps don’t solve your problem, call the Uniden
Customer Service Center.
Problem:
Things to try:
1. Check the radio’s power cord and all connections.
2. Check the fuse in the radio’s power cord.
3. Check your vehicle’s electrical system.
Radio won’t turn
on (no power)
1. Adjust the squelch level.
2. Check the antenna, cable and connectors.
3. Check operation mode of the radio.
Poor reception
Background noise 1. Adjust the squelch level.
1. Check the antenna, cable and connectors.
Weak
transmission
2. Check the antenna grounding.
3. Check for corrosion on the connectors.
PA won’t
broadcast
1. Check the CB/PA toggle is set to PA.
2. Check the mike’s PTT button is pressed in when you talk.
Service and repair information
► Service, repair, or alignment should only be attempted by a qualified
and/or licensed radio technician.
► When ordering parts, it is important to specify the correct model
number of this radio.
► It is the user’s responsibility to make sure the radio is operating in
accordance with the FCC Citizens Radio Service regulations at all
8
times.
SPECIFICATIONS
General
Channels
40 AM
Frequency Range
Frequency Control
Frequency Tolerance
26.965 to 27.405 MHz
Phase Locked Loop (PLL) synthesizer
±0.005%
Operating Temperature -30ºC to +50ºC
Microphone
Input Voltage
Current Drain
RX
Size
Weight
Plug in type, electret
13.8 V DC nom. (+ or - ground)
TX full mod., 1.4A
with max. audio output, 0.8A
4-7/8” W x 7-1/2” D x 1-3/4” H
1 lb. 3 oz.
Antenna Connector
LCD Meter
UHF, SO-239
Indicates relative RF output and received signal strength
TransmiTTer
Power Output
4 Watts
Modulation
Freq. Response
Output Impedance
Class B amplitude modulation
300-2500 Hz
50 ohms, unbalanced
receiver
Sensitivity
Selectivity
Image Rejection
I.F. Frequency
0.8μV for 10 dB; (S + N) /N typical (limit 1.6μV)
6 dB @ 7kHz, 70 dB @ 10kHz typical
65 dB typical
Double Conversion Superheterodyne
1st 10.692 MHz
2nd 450 kHz
Automatic Gain Control less than 10dB change in audio output for inputs from 10
(AGC)
to 50,000 microvolts
Squelch
Adjustable; threshold less than 1.25μV
3 watts max. into 8 ohms
300 to 2000 Hz
less than 10% at 0.5 watts, 1000Hz
8 ohms, 2 watts round
Audio Output Power
Freq. Response
Distortion
Internal Speaker
Specifications and features are subject to change without notice.
9
TWO-YEAR LIMITED WARRANTY
WARRANTOR: UNIDEN AMERICA CORPORATION (“Uniden”)
ELEMENTS OF WARRANTY: Uniden warrants, for two years, to the original retail
owner, this Uniden Product to be free from defects in materials and craftsmanship with
only the limitations or exclusions set out below.
WARRANTY DURATION: This warranty to the original user shall terminate and be
of no further effect 24 months after the date of original retail sale. The warranty is
invalid if the Product is (A) damaged or not maintained as reasonable or necessary,
(B) modified, altered, or used as part of any conversion kits, subassemblies, or any
configurations not sold by Uniden, (C) improperly installed, (D) serviced or repaired by
someone other than an authorized Uniden service center for a defect or malfunction
covered by this warranty, (E) used in any conjunction with equipment or parts or as part
of any system not manufactured by Uniden, or (F) installed or programmed by anyone
other than as detailed by the owner’s manual for this product.
STATEMENT OF REMEDY: In the event that the product does not conform to this
warranty at any time while this warranty is in effect, warrantor will either, at its option,
repair or replace the defective unit and return it to you without charge for parts,
service, or any other cost (except shipping and handling) incurred by warrantor or
its representatives in connection with the performance of this warranty. Warrantor,
at its option, may replace the unit with a new or refurbished unit. THE LIMITED
WARRANTY SET FORTH ABOVE IS THE SOLE AND ENTIRE WARRANTY
PERTAINING TO THE PRODUCT AND IS IN LIEU OF AND EXCLUDES ALL
OTHER WARRANTIES OF ANY NATURE WHATSOEVER, WHETHER EXPRESS,
IMPLIED OR ARISING BY OPERATION OF LAW, INCLUDING, BUT NOT LIMITED
TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. THIS WARRANTY DOES NOT COVER OR PROVIDE FOR
THE REIMBURSEMENT OR PAYMENT OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES. Some states do not allow this exclusion or limitation of incidental or
consequential damages so the above limitation or exclusion may not apply to you.
LEGAL REMEDIES: This warranty gives you specific legal rights, and you may also
have other rights which vary from state to state. This warranty is void outside the United
States of America.
PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: If, after following
the instructions in the owner’s manual you are certain that the Product is defective,
pack the Product carefully (preferably in its original packaging). The Product should
include all parts and accessories originally packaged with the Product. Include
evidence of original purchase and a note describing the defect that has caused you
to return it. The product should be shipped freight prepaid, by traceable means, to
warrantor at:
Uniden America Service
743 Henrietta Creek Rd.
Roanoke, TX 76262
(800) 297-1023, 8 a.m. to 5 p.m., Central, Monday through Friday
|