Telecommunication Systems Division
CIX40 Voice Processing System
User Guide
July 2006
© Copyright 2006
Publication Information
Toshiba America Information Systems, Inc.
Telecommunication Systems Division
Toshiba America Information Systems, Inc.,
Telecommunication Systems Division, reserves
the right, without prior notice, to revise this
information publication for any reason, including,
but not limited to, utilization of new advances in
the state of technical arts or to simply change the
design of this document.
All rights reserved. No part of this manual,
covered by the copyrights hereon, may be
reproduced in any form or by any means—
graphic, electronic, or mechanical, including
recording, taping, photocopying, or information
retrieval systems—without express written
permission of the publisher of this material.
Further, Toshiba America Information Systems,
Inc., Telecommunication Systems Division, also
reserves the right, without prior notice, to make
such changes in equipment design or
components as engineering or manufacturing
methods may warrant.
Strata is a registered trademark of Toshiba
Corporation.
Stratagy and Perception are registered
trademarks of Toshiba America Information
Systems, Inc.
CIX-UG-GVPH-VA
Trademarks, registered trademarks, and service
marks are the property of their respective
owners.
Version A, July 2006
TOSHIBA AMERICA INFORMATION SYSTEMS, INC. (“TAIS”)
Telecommunication Systems Division License Agreement
IMPORTANT: THIS LICENSE AGREEMENT (“AGREEMENT”) IS A LEGAL AGREEMENT BETWEEN YOU (“YOU”) AND TAIS. CAREFULLY READ THIS LICENSE AGREEMENT. USE OF ANY
SOFTWARE OR ANY RELATED INFORMATION (COLLECTIVELY, “SOFTWARE”) INSTALLED ON OR SHIPPED WITH A TAIS TELECOMMUNICATION SYSTEMS PRODUCT OR OTHERWISE MADE
AVAILABLE TO YOU BY TAIS IN WHATEVER FORM OR MEDIA, WILL CONSTITUTE YOUR ACCEPTANCE OF THESE TERMS, UNLESS SEPARATE TERMS ARE PROVIDED BY THE SOFTWARE
SUPPLIER. IF YOU DO NOT AGREE WITH THE TERMS OF THIS LICENSE AGREEMENT, DO NOT INSTALL, COPY OR USE THE SOFTWARE AND PROMPTLY RETURN IT TO THE LOCATION
FROM WHICH YOU OBTAINED IT IN ACCORDANCE WITH APPLICABLE RETURN POLICIES. EXCEPT AS OTHERWISE AUTHORIZED IN WRITING BY TAIS, THIS SOFTWARE IS LICENSED FOR
DISTRIBUTION THROUGH TAIS AUTHORIZED CHANNELS ONLY TO END-USERS PURSUANT TO THIS LICENSE AGREEMENT.
1. License Grant. The Software is not sold; it is licensed upon payment of applicable charges. TAIS grants to you a personal, non-transferable and non-exclusive right to use the copy of the Software
provided under this License Agreement. You agree you will not copy the Software except as necessary to use it on one TAIS system at a time at one location. Modifying, translating, renting, copying,
distributing, printing, sublicensing, transferring or assigning all or part of the Software, or any rights granted hereunder, to any other persons and removing any proprietary notices, labels or marks from the
Software is strictly prohibited except as permitted by applicable law; you agree violation of such restrictions will cause irreparable harm to TAIS and provide grounds for injunctive relief, without notice,
against you or any other person in possession of the Software. You and any other person whose possession of the software violates this License Agreement shall promptly surrender possession of the
Software to TAIS, upon demand. Furthermore, you hereby agree not to create derivative works based on the Software. TAIS reserves the right to terminate this license and to immediately repossess the
software in the event that you or any other person violates this License Agreement. Execution of the Software for any additional capabilities require a valid run-time license.
2. Intellectual Property. You acknowledge that no title to the intellectual property in the Software is transferred to you. You further acknowledge that title and full ownership rights to the Software will remain
the exclusive property of TAIS and/or its suppliers, and you will not acquire any rights to the Software, except the license expressly set forth above. You will not remove or change any proprietary notices
contained in or on the Software. The Software is protected under US patent, copyright, trade secret, and/or other proprietary laws, as well as international treaties. Any transfer, use, or copying of the
software in violation of the License Agreement constitutes copyright infringement. You are hereby on notice that any transfer, use, or copying of the Software in violation of this License Agreement constitutes
a willful infringement of copyright.
3. No Reverse Engineering. You agree that you will not attempt, and if you employ employees or engage contractors, you will use your best efforts to prevent your employees and contractors from
attempting to reverse compile, reverse engineer, modify, translate or disassemble the Software in whole or in part. Any failure to comply with the above or any other terms and conditions contained herein
will result in the automatic termination of this license and the reversion of the rights granted hereunder back to TAIS.
4. Limited Warranty. THE SOFTWARE IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, TAIS AND ITS SUPPLIERS
DISCLAIM ALL WARRANTIES WITH REGARD TO THE SOFTWARE, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE WARRANTY OF NON-INFRINGEMENT OF THIRD
PARTY RIGHTS, THE WARRANTY OF YEAR 2000 COMPLIANCE, AND THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
TO THE QUALITY AND PERFORMANCE OF THE SOFTWARE IS WITH YOU. NEITHER TAIS NOR ITS SUPPLIERS WARRANT THAT THE FUNCTIONS CONTAINED IN THE SOFTWARE WILL MEET
YOUR REQUIREMENTS OR THAT THE OPERATION OF THE SOFTWARE WILL BE UNINTERRUPTED OR ERROR-FREE. HOWEVER, TAIS WARRANTS THAT ANY MEDIA ON WHICH THE
SOFTWARE IS FURNISHED IS FREE FROM DEFECTS IN MATERIAL AND WORKMANSHIP UNDER NORMAL USE FOR A PERIOD OF NINETY (90) DAYS FROM THE DATE OF DELIVERY TO
YOU.
5. Limitation Of Liability. TAIS’ ENTIRE LIABILITY AND YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS LICENSE AGREEMENT SHALL BE AT TAIS’ OPTION REPLACEMENT OF THE MEDIA OR
REFUND OF THE PRICE PAID. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL TAIS OR ITS SUPPLIERS BE LIABLE TO YOU FOR ANY CONSEQUENTIAL,
SPECIAL, INCIDENTAL OR INDIRECT DAMAGES FOR PERSONAL INJURY, LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION/DATA, OR ANY
OTHER PECUNIARY LOSS OF ANY KIND ARISING OUT OF THE USE OR INABILITY TO USE THE SOFTWARE, EVEN IF TAIS OR ITS SUPPLIER HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES. IN NO EVENT SHALL TAIS OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM BY A THIRD PARTY.
6. State/Jurisdiction Laws. SOME STATES/JURISDICTIONS DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES OR LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY MAY LAST, OR
THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO SUCH LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS LIMITED WARRANTY GIVES YOU
SPECIFIC RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE/JURISDICTION TO STATE/JURISDICTION.
7. Export Laws. This License Agreement involves products and/or technical data that may be controlled under the United States Export Administration Regulations and may be subject to the approval of the
United States Department of Commerce prior to export. Any export, directly or indirectly, in contravention of the United States Export Administration Regulations, or any other applicable law, regulation or
order, is prohibited.
8. Governing Law. This License Agreement will be governed by the laws of the State of California, United States of America, excluding its conflict of law provisions.
9. United States Government Restricted Rights. The Software is provided with Restricted Rights. The Software and other materials provided hereunder constitute Commercial Computer Software and
Software Documentation and Technical Data related to Commercial Items. Consistent with F.A.R. 12.211 and 12.212 they are licensed to the U.S. Government under, and the U.S. Government’s rights
therein are restricted pursuant to, the vendor’s commercial license.
10. Severability. If any provision of this License Agreement shall be held to be invalid, illegal or unenforceable, the validity, legality and enforceability of the remaining provisions hereof shall not in any way
be affected or impaired.
11. No Waiver. No waiver of any breach of any provision of this License Agreement shall constitute a waiver of any prior, concurrent or subsequent breach of the same or any other provisions hereof, and no
waiver shall be effective unless made in writing and signed by an authorized representative of the waiving party.
12. Supplier Software. The Software may include certain software provided by TAIS suppliers. In such event, you agree that such supplier may be designated by TAIS as a third party beneficiary of TAIS with
rights to enforce the Agreement with respect to supplier’s software.
YOU ACKNOWLEDGE THAT YOU HAVE READ THIS LICENSE AGREEMENT AND THAT YOU UNDERSTAND ITS PROVISIONS. YOU AGREE TO BE BOUND BY ITS TERMS AND CONDITIONS. YOU
FURTHER AGREE THAT THIS LICENSE AGREEMENT CONTAINS THE COMPLETE AND EXCLUSIVE AGREEMENT BETWEEN YOU AND TAIS AND SUPERSEDES ANY PROPOSAL OR PRIOR
AGREEMENT, ORAL OR WRITTEN, OR ANY OTHER COMMUNICATION RELATING TO THE SUBJECT MATTER OF THIS LICENSE AGREEMENT.
Toshiba America Information Systems, Inc.
Telecommunication Systems Division
9740 Irvine Boulevard
5932
Irvine, California 92618-1697
United States of America
DSD 020905
Toshiba America Information Systems, Inc.
Telecommunication Systems Division
End-User Limited Warranty
Toshiba America Information Systems, Inc., (“TAIS”) warrants that this telephone equipment manufactured by
Toshiba (except for fuses, lamps, and other consumables) will, upon delivery by TAIS or an authorized TAIS
dealer to a retail customer in new condition, be free from defects in material and workmanship for twenty-four (24)
months after delivery, except as otherwise provided by TAIS in the TAIS warranty accompanying the products or
posted on TAIS’s website. Products which are not manufactured by Toshiba but are purchased from Toshiba, will
be subject to the warranty provisions provided by the equipment manufacturer, unless TAIS notifies the end-user
of any additional warranty provisions in writing.
This warranty is void (a) if the equipment is used under other than normal use and maintenance conditions, (b) if
the equipment is modified or altered, unless the modification or alteration is expressly authorized by TAIS, (c) if
the equipment is subject to abuse, neglect, lightning, electrical fault, or accident, (d) if the equipment is repaired
by someone other than TAIS or an authorized TAIS dealer, (e) if the equipment’s serial number is defaced or miss-
ing, or (f) if the equipment is installed or used in combination or in assembly with products not supplied by TAIS
and which are not compatible or are of inferior quality, design, or performance.
The sole obligation of TAIS or Toshiba Corporation under this warranty, or under any other legal obligation with
respect to the equipment, is the repair or replacement of such defective or missing parts as are causing the malfunc-
tion by TAIS or its authorized dealer with new or refurbished parts (at their option). If TAIS or one of its autho-
rized dealers does not replace or repair such parts, the retail customer’s sole remedy will be a refund of the price
charged by TAIS to its dealers for such parts as are proven to be defective, and which are returned to TAIS through
one of its authorized dealers within the warranty period and no later than thirty (30) days after such malfunction,
whichever first occurs.
Under no circumstances will the retail customer or any user or dealer or other person be entitled to any direct,
special, indirect, consequential, or exemplary damages, for breach of contract, tort, or otherwise. Under no circum-
stances will any such person be entitled to any sum greater than the purchase price paid for the item of equipment
that is malfunctioning.
To obtain service under this warranty, the retail customer must bring the malfunction of the machine to the atten-
tion of one of TAIS’ authorized dealers within the applicable warranty period and no later than thirty (30) days
after such malfunction, whichever first occurs. Failure to bring the malfunction to the attention of an authorized
TAIS dealer within the prescribed time results in the customer being not entitled to warranty service.
THERE ARE NO OTHER WARRANTIES FROM EITHER TOSHIBA AMERICA INFORMATION SYSTEMS,
INC., OR TOSHIBA CORPORATION WHICH EXTEND BEYOND THE FACE OF THIS WARRANTY. ALL
OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, AND FITNESS FOR USE, ARE EXCLUDED.
No TAIS dealer and no person other than an officer of TAIS may extend or modify this warranty. No such modifi-
cation or extension is effective unless it is in writing and signed by the Vice President and General Manager, Tele-
communication Systems Division.
Contents
Organization ................................................................................................................ 5
Conventions ................................................................................................................. 6
Action/Response Table ......................................................................................... 7
Features to Personalize Your Mailbox ........................................................................ 4
Message Queues .......................................................................................................... 4
Forwarded Message .............................................................................................. 6
Reply Message ...................................................................................................... 6
Personal ................................................................................................................. 7
System ................................................................................................................... 7
Busy ....................................................................................................................... 7
Special Delivery Options ............................................................................................. 8
Urgent .................................................................................................................... 8
Private ................................................................................................................... 8
Return Receipt ....................................................................................................... 8
Future Delivery ............................................................................................................ 8
Message Destination Selections .................................................................................. 9
Personal Distribution Lists .................................................................................... 9
Strata CIX40 Voice Processing User Guide 07/06
1
System Distribution Lists .................................................................................... 10
Directory ............................................................................................................. 10
User Prompts ............................................................................................................. 11
Step 1: Access Your Mailbox ................................................................................... 14
From Internal Telephone ..................................................................................... 15
Step 3: Record Your Personal Greeting(s) ............................................................... 18
Step 5: Exit Your Mailbox or User Mode ................................................................. 20
Access Messages ....................................................................................................... 21
Play Your Messages .................................................................................................. 24
Send a Message .......................................................................................................... 33
Future Delivery .......................................................................................................... 44
Chapter 5 – Manage Mailbox
Change Your Greeting ............................................................................................... 46
Create or Record Over a Personal Greeting ........................................................ 47
Change Your Greeting Selection ........................................................................ 49
Strata CIX40 Voice Processing User Guide 07/06
2
Change Your Call Screening Setting .................................................................. 53
Select Your Busy Greeting .................................................................................. 56
Record Your Name ............................................................................................. 57
Change Your Message Notification .................................................................... 58
Review Your Option Settings ............................................................................. 60
Manage Your Lists .................................................................................................... 61
Use Guest User IDs ................................................................................................... 64
Message Waiting ....................................................................................................... 67
Responding to a Lit Msg LED ............................................................................ 67
Turning On/Off Message Waiting LED on Another Extension .......................... 68
Soft Key Control of Voice Mail .......................................................................... 68
Call Record to Voice Mail .................................................................................. 73
Direct Transfer to Voice Mailbox .............................................................................. 74
Voice Mail Conference .............................................................................................. 74
Call Monitor ............................................................................................................... 75
Glossary........................................................................................................................ 77
Strata CIX40 Voice Processing User Guide 07/06
3
Strata CIX40 Voice Processing User Guide 07/06
4
Introduction
This guide describes the voice messaging capabilities and procedures for making
your voice mail system work for you.
Organization
This guide is divided as follows:
• Chapter 1 – The Grand Tour is an overview of the voice mail system. Topics
covered are: features to personalize your mailbox; an explanation of message
queues, types and destinations; special delivery options; playback/recording
controls; and available user options.
• Chapter 2 – Getting Started provides instructions on those features you need
when accessing your voice mail for the first time, including changing your security
code and recording your name.
• Chapter 3 – Play Messages contains step-by-step instructions on playing
messages.
• Chapter 4 – Send Messages details how to send, forward, and reply to a
message.
• Chapter 5 – Manage Mailbox provides step-by-step instructions on recording
greetings, using destination (distribution) lists, and activating options such as Do
Not Disturb (DND) and Call Screening.
• Chapter 6 – Integration Features outlines Call Forward, Message Waiting, Soft
Key Control, Call Record, Direct Transfer to Voice Mail, Voice Mail Conferencing
and Call Monitor features.
• Glossary defines frequently-used voice processing system features and functions.
• Index
Strata CIX40 Voice Processing User Guide 07/06
7
Introduction
Conventions
Conventions
Conventions
Description
Elaborates specific items or references other information. Within
some tables, general notes apply to the entire table and numbered
notes apply to specific items.
Note
Important!
Calls attention to important instructions or information.
Press to answer a call to the Extension Number. Each station can
have multiple extension buttons. Incoming calls ring the extension
button(s) from the top down. For example, station 10's extensions
ring 10-1 first, then 10-2, 10-3, and 10-4. A station is considered
busy when all extensions are being used.
Extension
Number
Note
The naming convention for DKT assignments within
Toshiba is Directory Numbers. For clarity and ease of
understanding, the terms Extension Number and Phantom
Extension Number will be used in this document in lieu of
PDN and PhDN.
Arial bold
Courier
“Type”
Represents telephone buttons.
Shows a computer keyboard entry or screen display.
Indicates entry of a string of text.
Indicates entry of a single key. For example: Type prog then press
Enter.
“Press”
Shows a multiple PC keyboard or phone button entry. Entries
without spaces between them show a simultaneous entry. Example:
Esc+Enter. Entries with spaces between them show a sequential
entry. Example: # + 5.
Plus (+)
Tilde (~)
Means “through.” Example: 350~640 Hz frequency range.
Denotes the step in a one-step procedure.
Denotes a procedure.
!
!
8
Strata CIX40 Voice Processing User Guide 07/06
Introduction
Related Documents/Media
10
Strata CIX40 Voice Processing User Guide 07/06
The Grand Tour
1
This chapter provides an overview of the system and covers the following general
topics:
• Features to personalize your mailbox
• Message queues
• Message types
• Greetings
• Special delivery options
• Future delivery
• Message destination selections
• User options
• User prompts
• User tutorial (New User)
Strata CIX40 Voice Processing User Guide 07/06
1
The Grand Tour
Overview
Overview
Your voice mail system manages multiple voice processing functions simultaneously
24-hours-a-day, 7-days-a-week. Your mailbox is always available for callers to leave
private voice messages. In addition, you can update your greeting at your
convenience or send and receive messages from any tone-dialing telephone.
Callers control their own progress through the system. They no longer have to wait for
a person to answer the telephone. If your extension is busy or you do not answer,
callers can transfer to an operator, call another extension, or record a private, detailed
message.
A representative in your company has been assigned as the System Administrator for
the system. The System Administrator is responsible for configuring the system and
The configuration affects how and which features you can access. Whenever
possible, this guide provides information concerning feature exceptions and which
features may be configured to work differently.
You can access your mailbox from any tone-dialing telephone using your security
code. After you access your voice mail, you hear the number of messages you have in
your message queue(s), followed by a prompt from the Main Menu options (see
Figure 1). You can then:
• Listen to your messages
• Send or forward messages
• Reply to messages
• Manage your mailbox (e.g., change your greetings, create distribution lists, etc.)
2
Strata CIX40 Voice Processing User Guide 07/06
The Grand Tour
Overview
MAIN MENU
Exit User Mode
HANG UP
PLAY MESSAGES
SEND MESSAGES
MANAGE MAILBOX
Play the next message
Enter one of the following:
User ID plus
Directory plus name
Change your Greeting
Change your User Options
Manage your Lists
Save the current message
Delete the current message
Forward the current message
Reply to the current message
Special Functions
Select
~
for a Personal List
Personal List (1~7)
System List (1~7)
Multiple Destinations
Review your current list
Add a User ID to the list
Delete a User ID from the list
Record a list Comment
Return to a previous menu
Replay the current message
Play the Previous message
Record
Record a message, comment or reply
(Press when finished.)
Return to Main Menu
(number of messages to be
deleted plays)
Return to a previous menu
Manage Guest User IDs
Create a Guest User ID
Delete a Guest User ID
Review your Guest User IDs
Return to a previous menu
Return to a Main Menu
Send and Return to Main Menu
Review recording
Re-record
Append recording
Select Additional Destinations
User ID plus
Message Date and Time
Future Delivery Review
(Play, Save, Delete)
Continuous Delete
Directory
New/Saved message queue (toggle)
Continuous Play
Return to previous menu
Personal List (1~7)
System List (1~7)
when finished
Select
or
~
for a Personal Greeting
for the System Greeting
Review selected greeting
Record (new) greeting
Review greeting
Press
Special Delivery Options
Set Urgent status (On/Off)
Set Private status (On/Off)
Not available
for System
greeting
Re-record
Append to recording
Cancel recording
Save recording
Set Return Receipt request
(On/Off?)
Return to previous menu
Set the Hour (1~12)
AM
Set Future Delivery
Cancel message and select new
destination
Return to a previous menu
Review current greeting
Return to a previous menu
PM
Cancel and Return to Main Menu
Set the Minutes (0~59)
Set the Day (1~31)
Set the Month (1~12)
Set the Year (last two digits)
Change your Do Not Disturb (On/Off)
Change your Call Screening (On/Off)
Change your Security Code
Select your Busy Greeting (toggle)
Record your Busy Greeting
Record your Name
Return to previous menu
(message delivery time plays)
Enter notification template number
Enable/Disable notification template
(toggle)
Change notification digits
Save changes
Return to previous menu
Change message Notification
Review your Option Settings
Return to previous menu
6231
Figure 1
Admin Main Menu
Strata CIX40 Voice Processing User Guide 07/06
3
The Grand Tour
Features to Personalize Your Mailbox
Features to Personalize Your Mailbox
Your voice mail processing system offers a variety of features to personalize your
User ID Mailbox. The following are a few of those features:
code must be entered by you in order to “log into” your User ID mailbox, giving you
access to your messages, settings, greetings, etc. (see “Change Your Security
Code” on page 19).
• Name Recording – Your name is announced whenever you log onto your mailbox,
the directory is accessed, the system greeting is selected, or when a message is
sent by another voice mail user. When you first enter your mailbox, you need to
• Personal Greetings – You can record up to seven personal greetings that are
played when you are unavailable (see “Change Your Greeting” on page 46).
• Guest Users– You can create Guest User IDs that can be used by clients, friends,
etc. Users frequently use this feature to create guest IDs for clients, so that they
may easily exchange confidential information (see “Manage Guest User IDs” on
page 63).
Message Queues
Your messages reside in one of two queues—new or saved. Messages play in FIFO
(First In, First Out) or LIFO (Last In, First Out) order. Ask your System Administrator to
find out how your mailbox is configured.
New Message Queue
Messages in the New Message Queue are New or Pending messages.
New messages consist of messages that are unheard or partially heard (less than five
seconds). They remain in the queue, the Message Waiting LED remains on, and a
Return Receipt is not sent, if applicable, until the message is completely heard.
Messages that you have partially heard (five seconds or longer) are called Pending
messages. They remain in the New Message Queue, the Message Waiting LED is
turned off, and a Return Receipt is sent, if applicable.
4
Strata CIX40 Voice Processing User Guide 07/06
The Grand Tour
Message Queues
Note The Pending messages feature is available on a mailbox-to-mailbox basis.
Check with your System Administrator to find out if your mailbox is configured
for this feature.
When you press 1 from the Main Menu to play messages, your voice mail system
automatically accesses the New Message Queue. A new message begins to play
based on the type (urgent messages play first) and order received (FIFO/LIFO). If no
new messages exist, your voice mail system automatically accesses the Saved
Message Queue. If you are in the Saved Message Queue, you can toggle back to the
New Message Queue by pressing 77.
After you play the last message in the queue, your voice mail system prompts, “End of
messages.” You can choose to return to the top of the queue, go to the top of the other
queue, etc.
Saved Message Queue
Saved messages are messages that you saved or that were automatically saved by
your voice mail system at the end of the message.
Access the Saved Message Queue from the Main Menu by pressing 177 or from the
New Message Queue by pressing 77. Your voice mail system automatically accesses
the Saved Message Queue when no new messages exist. Saved messages play
based on order received (FIFO/LIFO).
After you play the last message in the queue, your voice mail prompts, “End of
messages.” You can choose to return to the top of the queue, go to the top of the other
queue, etc.
Note Ask your System Administrator to find out if your mailbox is configured with one
or two (New and Saved) message queue(s).
Strata CIX40 Voice Processing User Guide 07/06
5
The Grand Tour
Message Types
Message Types
New and Saved Messages can consist of the following special types of messages—
forwarded and message reply.
Forwarded Message
Any message sent to you can be forwarded to a single destination or a personal or
system distribution list. When forwarding a message, recording a message (comment)
is optional.
Reply Message
Messages to which you want to send an immediate answer can be sent as a reply
message. When replying to a message, your voice mail system does not prompt you
to select the destination since it “remembers” the source. The Reply feature only
works if the original message is sent from another voice mail user on the same
system.
When listening to a reply message, a prompt notifies the user of the name/User ID of
the person who sent the reply.
6
Strata CIX40 Voice Processing User Guide 07/06
The Grand Tour
Greetings
You can select either a personal or system greeting to play to callers when you do not
answer or when your telephone is busy.
Depending on how your system is configured, callers may hear a separate busy
greeting—the system or the custom busy greeting. See “Change Your User Options”
on page 51 for details.
Personal greetings are greetings that you record for callers. Your voice mail system
stores all recorded greetings under the personal greeting number (1~7) for your
mailbox. Using the greeting number, you can select the greeting which plays.
The System Administrator can also schedule your greetings to automatically play at
different times. If you choose, you can override the automatic schedule using the
System
The system greeting is a standard prerecorded greeting. It cannot be recorded over or
deleted. The greeting states, “Please leave a message for (name).” Your voice mail
Busy
If your User ID mailbox is configured for a personal busy greeting, you can record a
custom busy greeting that plays when your extension is busy. If a custom greeting is
not recorded, the default system busy greeting plays. See “Create or Record Over
Your Busy Greeting” on page 55 for details.
The custom busy greeting can also be turned on/off using the Select Your Busy
Greeting option on the Change Your User Options Menu (see “Select Your Busy
Greeting” on page 56).
Note The System Administrator must configure your User ID mailbox for the custom
busy greeting option to be available.
Strata CIX40 Voice Processing User Guide 07/06
7
The Grand Tour
Special Delivery Options
Special Delivery Options
In addition to recording and sending a new message, you can mark the message
urgent, private, or request a return receipt.
Urgent
Messages can be marked urgent by the sender and always play first in the New
Message Queue. After the message plays, the urgent status is removed.
Private
Messages can be marked private by the sender. The same options, such as saving
and deleting, apply to the private messages; however, a private message cannot be
forwarded. Once a message is sent, the private status cannot be removed.
Return Receipt
You can mark a message Return Receipt if you want verification of its receipt. When a
user plays (completely or partially) a message marked for Return Receipt, a
notification is sent back to the sender. Your voice mail system notifies the sender
when and by whom the message was received and plays the original message.
Future Delivery
Your voice mail system can be configured so that your message is delivered at a
future time and date specified by you. After marking the message for future delivery,
you can review (play, save, delete) the message at any time before it is sent.
8
Strata CIX40 Voice Processing User Guide 07/06
The Grand Tour
Message Destination Selections
Message Destination Selections
At the beginning of the Send Messages menu, you are asked to enter the message
destination(s).You can choose to enter a single destination (e.g., User ID) or multiple
destinations (e.g., personal list, User ID, system list). Entering the Multiple
Destinations option enables you to address your message to all the recipients at the
start of the menu.
You can then record your message and, if desired, add additional destinations when
prompted later in the menu. Valid destinations are:
• User ID
Note If you don’t know the user’s User ID, you can locate the ID on your voice mail
system’s system-wide directory by pressing 00.
• Personal distribution list
• System distribution list
See “Send a Message” on page 33 for instructions on using these options.
Personal Distribution Lists
You can originate up to seven Personal Distribution Lists consisting of other system
users. You can add or delete users at any time. The lists are for only your use.
At the time you create a list, you are given the option of recording a “list comment” that
serves as the title or name for the list. The comment plays each time you use the list to
confirm that you have chosen the correct distribution list.
Important! Try not to duplicate users on your distribution lists. Your voice mail
system does not check for duplicates when you send a message using
more than one list. For example, if you select Personal Distribution List
#1 and #3 as destinations for your message and User ID 1001 is on both
lists, User ID 1001 receives the same message twice.
Strata CIX40 Voice Processing User Guide 07/06
9
The Grand Tour
User Options
System Distribution Lists
In addition to Personal Distribution Lists, your voice mail system supports system-
wide distribution lists created by the System Administrator for use by everyone in your
company. You should check with your System Administrator to find out which lists are
available.
Whenever you enter the list number, the “list comment” for the selected system list
plays to confirm that you have chosen the right list.
Directory
You can enter the Dual Tone Multi-frequency (DTMF) digits corresponding to the first
few letters of a user’s name and your voice mail system plays the recorded name
(User ID and optionally the extension) that matches the combination of entered digits.
You can then select the name or go on to the next name in the directory.
Each User ID can be identified with up to two names. These names are entered into
the automated directory by the System Administrator and enhance the directory’s
search/find capabilities. Common choices for the names are the first and last names
of the user or the last name of the user and a commonly misspelled version of the last
name.
User Options
You can set your telephone for Do Not Disturb (DND) or call screening, select or
record a busy greeting (plays when your telephone is busy), and designate where or
how you are notified of a message.
The following is a brief description of each of the options. Please see “Change Your
User Options” on page 51 for more detailed information.
Important! The System Administrator must activate these features for them to be
available.
• DND – Your voice mail system automatically sends calls to your User ID (mailbox)
without first ringing your telephone.
• Call Screening – Your voice mail system asks callers for their name and company.
Without the caller’s knowledge, the system relays that information to you. You can
decide to receive the call, let the call forward to your mailbox, or transfer the call to
another extension with or without an announcement.
10
Strata CIX40 Voice Processing User Guide 07/06
The Grand Tour
User Prompts
• Busy Greeting – You can record your own custom busy greeting that plays when
callers reach your extension, and it is busy.
• Message Notification – Your User ID can have up to 10 notification records
programmed by the System Administrator with a specific notification method
(message waiting lights, stutter dial tone, pagers, voice, etc.) and the time/day
when that notification record applies.
Once you have turned on a specific notification record, your voice mail system
automatically calls you at the designated number and with the chosen method to notify
you of your messages.
User Prompts
Your voice mail system prompts only for menu options available to you. You do not
hear prompts for options:
• Not supported by your voice mail system (e.g., future delivery)
• Not configured for your mailbox by the System Administrator (e.g., guest users, do
not disturb).
Check with your System Administrator to verify which user options are available to
you.
User Tutorial (New User)
A first time user of the voice mail system automatically hears a user-friendly tutorial
upon logging in to his/her mailbox. The tutorial walks the user through the process of:
• Recording his/her name (if required)
• Recording a personal greeting for the mailbox
• Changing the default security code
Once the tutorial is completed successfully, it cannot be replayed.
Strata CIX40 Voice Processing User Guide 07/06
11
This page is intentionally left blank.
Getting Started
2
This chapter instructs you on accessing and exiting your mailbox and outlines the user
tutorial steps.
User Tutorial
When you log on to the your voice mail system for the very first time, you hear a
tutorial that walks you through the following basic steps:
• Record your name (if required). Your name is announced whenever you log onto
your mailbox (varies by system), the directory is accessed, the system greeting is
selected, or when another voice mail user sends a message to you.
• Record your personal greeting. Your personal greeting automatically plays when
you are not available to answer your telephone.
• Change the default security code for your mailbox to ensure privacy. You should
change it on a regular basis.
Note If you do not complete the tutorial before hanging up, your voice mail system
saves any completed portion (e.g., your name recording) and restarts where
you left off the next time you log on to your mailbox. Once the tutorial is
completed successfully, it cannot be replayed.
Strata CIX40 Voice Processing User Guide 07/06
13
Getting Started
Access Your Mailbox
Step 1: Access Your Mailbox
The Main Menu (shown below) is your starting point for all of your voice mail system’s
messaging features. Pressing 999 from most menus returns you to the Main Menu.
To access your mailbox, you need to know:
• The telephone number to access your voice mail system
• Your User ID number
• Your default security code
Please ask your System Administrator if you do not have this information.
MAIN MENU
1
2
3
0
#
Play Messages
Send Messages
Manage Mailbox
Exit user mode
Hang Up
Each time you access your User ID (mailbox), your voice mail system announces:
• Your name (and extension, if applicable)
Note Your voice mail system may not be configured to play your name when you log
on to your mailbox.
• The number of new and saved messages you have in your message queue(s)
• The number of messages that will be purged upon exiting your mailbox, if
applicable
Your voice mail system then plays the Main Menu options.
If you receive new messages while you are logged on to your mailbox, your voice mail
system informs you that you have new messages when you return to the Main Menu.
14
Strata CIX40 Voice Processing User Guide 07/06
Getting Started
Access Your Mailbox
From External Telephone
1. From an external
telephone, call your voice
mail system on
The system answers with your standard company
greeting.
___________.
2. When voice mail
Your voice mail prompts you to enter your User ID.
answers, press
.
*
3. Enter your User ID + #.
If your voice mail system is designed with a fixed
length number for your User ID, do not press # after
entering a User ID. See your System Administrator for
specific operation of your system.
Your voice mail prompts you to enter your security
code.
4. Enter the default security
If your voice mail system is designed with a fixed
length number for your security code, do not press #
after entering the security code. See your System
Administrator for specific operation of your system.
code + #.
If you make a mistake
while entering the code,
press to re-enter.
You are now in your mailbox. Your voice mail system
plays your name and the number of messages you
have and then prompts you with a list of choices from
the Main Menu.
*
From Internal Telephone
1. From an internal
telephone, call your voice
mail system on
Your voice mail prompts you to enter your security
code.
___________.
Strata CIX40 Voice Processing User Guide 07/06
15
Getting Started
Access Your Mailbox
2. Enter the default security
If your voice mail system is designed with a fixed
length number for your security code, do not press #
after entering the security code. See your System
Administrator for specific operation of your system.
code + #.
If you make a mistake
while entering the code,
press to re-enter.
You are now in your mailbox. Your voice mail system
plays your name and the number of messages you
have and then prompts you with a list of choices from
the Main Menu.
*
16
Strata CIX40 Voice Processing User Guide 07/06
Getting Started
Record Your Name
Step 2: Record Your Name
accessed, the system greeting is selected, or when a message is sent by another
voice mail user.
Note Your voice mail system may not be configured to play your name when you log
on to your mailbox.
When you first enter your mailbox, the tutorial prompts you to record your name and
walks you through the entire recording sequence. You can re-record your name at any
time (see “Record Your Name” on page 57).
1. At the tone, state your
name slowly and clearly
(if you like, you can also
state your extension).
2. Press # when done.
Your voice mail plays your name recording.
3. After your name plays,
press:
1
To accept the
recording
Your recording becomes part of your mailbox and your
voice mail system prompts you to record your
personal greeting.
2
Re-record
Your voice mail system returns you to the record your
name prompt.
Strata CIX40 Voice Processing User Guide 07/06
17
Getting Started
Record Your Personal Greeting(s)
Step 3: Record Your Personal Greeting(s)
The tutorial now prompts you to record your personal greeting. This greeting becomes
your Personal Greeting #1. You can record up to six other greetings (see “Create or
Record Over a Personal Greeting” on page 47 for instructions).
Personal greetings should be informative and advise callers when you will be
available to return their calls or respond to their messages. You can update personal
greetings as often as you want.
Sample Greeting
“Hi. This is Mary Smith of the Toshiba Marketing Department. It is Monday, June 19,
and I am in the office today. I am either on the telephone or have stepped away for a
few minutes and your call has been forwarded to my voice mailbox. If at the tone you
leave a detailed message and a telephone number where I can reach you, I will be
happy to return your call.”
1. At the tone, begin
recording your greeting.
The following information should be included in your
Personal Greeting:
©
©
©
©
©
©
Your name
Company and/or department
Date
Your availability
Instructions to leave a detailed message
Call coverage options
2. Press # when done.
Your voice mail system plays your greeting.
3. After your greeting plays,
press:
1
To accept the
recording
Your greeting becomes Personal Greeting #1 and
your voice mail system prompts you to change your
security code.
2
Re-record
Your voice mail system returns you to the record your
greeting prompt.
18
Strata CIX40 Voice Processing User Guide 07/06
Change Your Security Code
Step 4: Change Your Security Code
The tutorial prompts you to change your mailbox’s security code from the preassigned
code. You should change your security code on a regular basis thereafter to ensure
the privacy of your messages and personal greetings (see “Change Your Security
Code” on page 54).
1. Enter your new security
The minimum and maximum number of digits for the
security code are determined by your System
Administrator. Please ask your System Administrator
for confirmation on the number.
code + #.
Your voice mail system prompts you to re-enter your
new security code for verification.
2. Re-enter your new
After entering the security code a second time, your
voice mail system announces that your security code
has been changed.
security code + #.
You have completed the tutorial. Your voice mail system announces “mailbox number
xxx is enabled,” plays your recorded name and announces the number of messages
in your mailbox. You can now perform any of the functions available on your voice mail
system’s Main Menu or exit the mailbox.
Strata CIX40 Voice Processing User Guide 07/06
19
Getting Started
Exit Your Mailbox or User Mode
Step 5: Exit Your Mailbox or User Mode
When you press # to hang up, you hear “Thank you
for calling. Good-bye.”
ä To exit your mailbox,
press # to hang up from a
Toshiba telephone system
...or 999# to hang up
from another
manufacturer’s telephone
system
Your voice mail system can be configured so that you
can exit your mailbox without leaving the voice mail
system. Please ask your System Administrator to find
out if your system is configured for this or some other
function when pressing 0.
...or to exit the user
mode, press 0.
If you have the “0 to EXIT User Mode” capability, you
hear the voice mail system’s company greeting. You
can now access another user or a different mailbox.
20
Strata CIX40 Voice Processing User Guide 07/06
Play Messages
3
This chapter explains how to use the Play Messages feature. It discusses:
• Access Messages
• Playback Controls
• Play your messages
• Special functions
Depending upon your telephone system and telephone, a message waiting light is lit
on your telephone when a voice message has been left for you on the voice mail
system.
If configured, your voice mail system automatically turns off your message waiting
light on your telephone when your new message queue is empty or only Pending
messages remain (see “Message Queues” on page 4). The Message Waiting LED
remains on only if there are new messages in the queue.
Access Messages
Once you press 1 to play your messages, the following telephone keys assist you in
going through your messages:
1
Takes you to the next message or back to the top of the queue when you
have reached the last message in the queue.
1
Replays the current message.
*
*
2
Takes you to the previous message or back to the last message in the
queue when you have reached the top of the message queue.
77 Toggles between the New and Saved Message Queues.
Strata CIX40 Voice Processing User Guide 07/06
21
Play Messages
Playback Controls
If new messages arrive while you are accessing your mailbox, your voice mail system
notifies you that a new message is in the queue upon returning to the Main menu.
Playback Controls
While playing a message, you can pause, control the volume, location, and speed of
playback using the following keys (shown below).
Press
to play Previous Message
(from first message go to last)
Play Next Message
(from last message go to first)
Pause/Resume
(toggle or 30 secs.)
Turn Up volume
Back Up (rewind)
Go Forward (advance)
7435
Turn Down volume
22
Strata CIX40 Voice Processing User Guide 07/06
Play Messages
Playback Controls
1 Play Next Message
Plays next message in queue. If you are at the last message in the queue, goes to the
first message in the same queue.
2 Play Previous Message
*
Plays previous message in queue. If you are at the first message in the queue, goes
to the last message in the same queue.
4 Pause/Resume (toggle or 30 seconds)
At any time while playing messages, you can press 4 to pause the playback for 30
seconds. The message resumes playing as soon as you press 4 or automatically at
the end of 30 seconds. You can pause the playback as many times as necessary.
8 Turn Up Volume, 0 Turn Down Volume
Each time you press 8 or 0, the volume of messages adjusts one increment until the
maximum number of increments is reached. Your voice mail system saves the current
level when you exit.
Back Up (rewind)
*
The message backs up/rewinds and then begins playing. The default is five seconds
(set by the System Administrator).
# Go Forward (advance)
The message goes forward/advances and then begins playing. The default is five
seconds (set by the System Administrator).
Strata CIX40 Voice Processing User Guide 07/06
23
Play Messages
Play Your Messages
Play Your Messages
When you access your mailbox, your voice mail system tells you the number of
urgent, new and saved messages (if supported by your system; check with your
System Administrator) you have in your mailbox. If your mailbox is empty, the voice
mail system prompts do not include “press 1 to play messages.”
When you press 1 from the Main Menu to play messages (menu shown below), your
voice mail system automatically accesses the New Message Queue. If no messages
exist in the New Message Queue, your voice mail system automatically accesses the
Saved Message Queue.
From the Main Menu:
Play Messages
Play the next message
Save the current mesage
Delete the current message
Forward the current message
Reply to the current message
While playing a message, you can press:
Special Functions
Pause/Resume (toggle or 30 seconds)
Message Date and Time
Turn Up volume
Future Delivery Review (Play, Save, Delete)
Turn Down volume
Continuous Delete
Backup (rewind)
New/Saved message queue (toggle)
Go Forward (advance)
Continuous Play
7399
Return to previous menu
Replay the current message
Play the Previous message
Return to the Main Menu
24
Strata CIX40 Voice Processing User Guide 07/06
Play Messages
Play Your Messages
1. From the Main Menu,
A message plays.
press 1 Play Messages.
Once you play a message, your voice mail system
prompts you with the Play Messages Menu until you
press 9 to exit the menu or you activate another
selection.
While the message plays,
you can select 4 pause/
resume, 8 turn up
volume, 0 turn down
volume, back up
*
(rewind), # go forward
(advance)
2. (Optional) While the
message plays or
immediately after, you
can select one of the
following:
1
Play the next message
Skips to the beginning of the next message.
Note If you reach the end of your messages, pressing
1 takes you back to the top of the same queue.
2
3
Save the current
message
Saves the current message. The Play Messages
Menu plays.
Delete the current
message
Flags the current message for deletion. The Play
Messages Menu plays. When you exit Play
Messages, your voice mail system tells you the
number of messages to be deleted. If you do not want
to delete a message, save the message before exiting
your mailbox.
Note Your voice mail system can be programmed to
delete messages after a preset length of time.
Consult your System Administrator. Your voice
mail system notifies you before purging
messages.
Strata CIX40 Voice Processing User Guide 07/06
25
Play Messages
Play Your Messages
5
6
Forward the current
message
can be forwarded to a single user, multiple users, or a
destination list. See “Forward a Message” on page 37
for details on this feature.
Reply to the current
message
Your reply is sent to the originator of the message. In
addition, you can send your reply to a single user,
multiple users, or a destination list. See “Reply to the
Current Message” on page 40 for details on this
feature.
7
Special Functions
Your voice mail system prompts with the options. See
“Special Functions” on page 27 for instructions on
using this option.
The current message plays from the beginning.
1 Replay the current
*
message
The previous message plays from the beginning.
2 Play the previous
*
message
Note If you are at the top of the message queue,
pressing 2 takes you to the bottom of the same
*
queue.
9
Return to Main Menu
Your voice mail system tells you the total number of
messages that will be deleted when you log out of
your mailbox, and then returns to the Main Menu.
26
Strata CIX40 Voice Processing User Guide 07/06
Play Messages
Special Functions
Special Functions
You can check the date and time a message was sent, or review a message set for
future delivery in the Play Messages menu.
When you play a message, this option is available by pressing 7 Special Functions.
ä
Press an option number:
4
Message Date and
Time
The date and time the message was received plays,
followed by the entire message.
Note If your System Administrator programmed an
automatic date and time stamp for all messages,
the stamp plays automatically at the beginning
of each message.
5
Future Delivery
Review
Your voice mail system plays your name, the future
delivery time/date the message will be sent and the
entire message. Your voice mail system automatically
saves the message for future delivery.
While the message is
playing or
immediately after,
you can select any of
the following:
Skips to the beginning of the next future delivery
message.
1
Play the next
message
Saves the current future delivery message.
2
3
Save the current
message
Flags the current future delivery message for deletion.
When you exit the future delivery review, voice mail
tells you the number of messages to be deleted. If you
do not want to delete a message, save the message
before exiting the future delivery review.
Delete the current
message
Strata CIX40 Voice Processing User Guide 07/06
27
Play Messages
Special Functions
Your voice mail system tells you the total number of
messages that will be deleted when you log out of your
mailbox, and then returns to the Special Functions
Menu.
9
Return to the
Special Functions
Menu
6
Continuous Delete
Deletes multiple messages at one time in your New or
Saved Message Queue without additional action from
you.
Note See the Continuous Play feature on page 28
before using Continuous Delete.
The number of messages deleted is based on a preset
length of time (designated in minutes) set on a
system-wide basis by your System Administrator.
Important! The deletion starts with the first message
in the queue and continues until the
preset time has expired. Both heard and
unheard messages are deleted. If there
are two queues—new and saved—the
deletion occurs only in the queue you are
in when you press 6 for continuous
delete.
Ask your System Administrator to verify that you have
this option.
7
8
New/Saved message This feature operates as a toggle; use it to move back
queue (toggle)
and forth between the New and Saved Message
Queues.
Continuous Play
Plays multiple messages at one time in your New or
Saved Message Queue without additional action from
you.
The number of messages played is based on a preset
length of recorded time (designated in minutes) and
therefore varies. (Your System Administrator sets the
length of time on a system-wide basis.) The messages
played are those whose cumulative time is equal to, or
less than, the designated number of minutes.
28
Strata CIX40 Voice Processing User Guide 07/06
Play Messages
Special Functions
Important! The playback starts with the first
message in the queue and continues until
the preset time has expired. If there are
two queues—new and saved—the
playback occurs only in the queue you
are in when you press 8 for continuous
playback.
Ask your System Administrator to verify that you have
this option.
9
Return to previous
menu
Your voice mail system returns to the Play Messages
Menu.
Strata CIX40 Voice Processing User Guide 07/06
29
This page is intentionally left blank.
Send Messages
4
From any tone-dialing telephone, you can record and send a message to a user,
several users, or to a personal or system distribution list.
This chapter covers:
• Recording controls
• Send a message
• Forward a message
• Reply to the current message
• Special delivery options
• Future delivery
Recording Controls
While recording a message, you can pause/resume the recording or end the recording
using the following keys (shown below).
Pause/Resume
(toggle or 30 secs.)
End recording
3096
Strata CIX40 Voice Processing User Guide 07/06
31
Send Messages
Recording Controls
4 Pause/Resume (toggle or 30 seconds)
At any time while recording messages to another mailbox in the system, you can
press 4 to pause for 30 seconds. The message resumes recording as soon as you
press 4. Your voice mail system prompts you with, “Begin recording... (Beep).”
If within the 30 seconds you do not press 4, voice mail restarts another 30-second
pause. If during the second 30-second pause you:
• Do not press any key, voice mail assumes you have cancelled the message and
returns to the Main Menu.
• Press #, your voice mail system returns you to the Send Messages Menu and you
can send, review or record over the message.
# End Recording
After recording a message, press # to end the recording.
32
Strata CIX40 Voice Processing User Guide 07/06
Send Messages
Send a Message
Send a Message
Using the Send Messages Menu (shown below), you can record a message and send
it to a single mailbox or multiple destinations (e.g., personal or system distribution list),
forward a message (with a comment), or reply to a message sent you.
From the Main Menu:
While recording a message, you
can press:
Play Messages
Forward the current message
Pause/Resume (toggle or 30
seconds)
Reply to the current message
End recording
Send Messages
Enter one of the following:
User ID plus
Directory plus name
Personal List (1~7)
System List (1~7)
Multiple Destinations
Select from the following:
User ID plus
Directory plus name
Personal List (1~7)
System List (1~7)
Record
Record a message, comment, or reply
Press
when finished
Send and Return to Main menu
Review recording
Re-record
Append recording
Select Additional Destinations
Special Delivery Options
Set Urgent status (On/Off)
Set Private status (On/Off)
Set Return Receipt request (On/Off)
Return to previous menu
Set Future Delivery
Set the Hour (1~12)
AM
PM
Set the Minutes (0~59)
Set the Day (1~31)
Set the Month (1~12)
Set the Year (last two digits)
Cancel message and select new destination
Cancel and return to Main Menu
Return to previous menu
(message delivery time plays)
7400
Strata CIX40 Voice Processing User Guide 07/06
33
Send Messages
Send a Message
1. From the Main Menu,
Your voice mail system prompts you to enter the
destination (i.e., User ID, Personal, System List, or
Multiple Destinations).
press 2 Send Messages.
2. Enter one of the following
destinations:
Note A message can be sent to a total of 33
destinations, including destinations entered in
the 4 Additional Destinations option (see “4
Select Additional Destinations” on page 36). A
list counts as one destination.
Your voice mail system plays the user’s name or User
ID for confirmation.
©
User ID and press #.
Press # again to
record a message
without playing the
user’s name.
Note If your voice mail system is designed with a
fixed length number for your User ID, do not
press # after entering a User ID. See your
System Administrator for specific operation of
your system.
You are prompted to enter the person’s name.
©
00Directory
Your voice mail system plays the first name that
matches the combination of letters you entered.
Enter the first few
letters of the first or
last name (Q=7, Z=9).
Press # to select the
name as the
destination
...or 1 to hear the next
name
...or to cancel your
*
entry and re-enter.
34
Strata CIX40 Voice Processing User Guide 07/06
Send Messages
Send a Message
You are prompted for the destination list number.
©
01Personal List
Your voice mail system plays the list comment or
number for confirmation. See “Manage Your Lists” on
page 61 to create or revise a destination (distribution)
list.
Enter a list number
(1~7).
You are prompted for the destination list number.
©
02System List
Your voice mail system plays the list comment or
number for confirmation. Ask your System
Administrator for more information about System
Lists.
Enter a list number
(1~7).
©
04 Multiple
Destinations
You are prompted for the destinations: User ID,
00, 01 Personal List and/or 02 System List.
3. Record a message after
the tone. When finished,
press #.
While recording, you can
press 4 to pause/resume
(toggle or 30 seconds)
the recording.
4. Press # again to send the
Your voice mail system tells you that your message
has been sent and returns you to the Main Menu.
message immediately
Important! If you press # to send your message,
you cannot use the special recording
and sending options.
...or before sending the
message, you can use any
of the following options:
1
2
Review recording
Re-record
The recording plays.
The system prompts you to record at the beep.
Press # when done.
Strata CIX40 Voice Processing User Guide 07/06
35
Send Messages
Send a Message
3
4
7
Append recording
The appended recording plays after the already
recorded portion of the message. The system prompts
you to record at the beep.
Press # when done.
Select Additional
Destinations
Send the message to additional destinations. Valid
04 Multiple Destinations.
Special Delivery
Options
You can send a message as urgent, private, or with a
return receipt request. The settings can be used in
message.
instructions on using this option.
8
Set Future Delivery
You can have your message delivered at a future
specified time and date. See “Future Delivery” on
page 44 for instructions on using this option.
Cancel message and
Cancels the message and returns you to Step 2 on
page 34.
*
select new
destination
Cancels the message and returns you to the Main
Menu.
** Cancel and Return to
the Main Menu
36
Strata CIX40 Voice Processing User Guide 07/06
Send Messages
Forward a Message
Forward a Message
Any message sent to you can be forwarded to a single destination or a personal or
system distribution list. When forwarding a message, recording a message (comment)
is optional.
1. From the Play Messages
Menu, press 5 Forward
the current message.
Your voice mail system prompts you to enter the
destination (i.e., User ID, Personal, System List or
Multiple Destinations).
2. Enter one of the following
destinations:
Note A forwarded message can be sent to a total of
33 destinations, including destinations entered
in the 4 Additional Destinations option (see “4
Select Additional Destinations” on page 39). A
list counts as one destination.
Your voice mail system plays the user’s name or User
ID for confirmation.
©
User ID and press #.
Press # again to
record a message
without playing the
user’s name.
Note If your voice mail system is designed with a
fixed length number for your User ID, do not
press # after entering a User ID. See your
System Administrator for specific operation of
your system.
You are prompted to enter the person’s name.
©
00Directory
Your voice mail system plays the first name that
matches the combination of the letters you entered.
Enter the first few
letters of the first or
last name (Q = 7,
Z = 9).
Press # to select the
name as the
destination
...or 1 to hear the next
name
...or to cancel your
*
entry and re-enter.
Strata CIX40 Voice Processing User Guide 07/06
37
Send Messages
Forward a Message
You are prompted for the destination list number.
©
01Personal List
Your voice mail system plays the list comment or
number for confirmation. See “Manage Your Lists” on
page 61 to create or revise a destination (distribution)
list.
Enter a list number
(1~7).
You are prompted for the destination list number.
©
02System List
Your voice mail system plays the list comment or
number for confirmation. Ask your System
Administrator for more information about System
Lists.
Enter a list number
(1~7).
©
04 Multiple
Destinations
You are prompted for the destinations: User ID,
00, 01 Personal List and/or 02 System List.
3. (Optional) Record a
message (comment) after
the tone. When finished,
press #.
While recording, you can
press 4 to pause/resume
(toggle or 30 seconds)
the recording.
4. Press # again to forward
Your voice mail system tells you that your message
has been forwarded and returns you to the Main
Menu.
the message immediately
Important! If you press # to forward your message,
you cannot use the special recording
and sending options.
...or before sending the
message, you can use any
of the following options:
1
Review recording
The forwarding comment plays.
38
Strata CIX40 Voice Processing User Guide 07/06
Send Messages
Forward a Message
2
3
Re-record
The system prompts you to record the comment at the
beep.
Press # when done.
Append recording
Press # when done.
The appended forwarding comment plays after the
already recorded message comment. The system
prompts you to record at the beep.
4
7
Select Additional
Destinations
Send the forwarded message to additional
You cannot enter 04 Multiple Destinations.
Special Delivery
Options
You can send a message as urgent, private, or with a
return receipt request. The settings can be used in
message.
instructions on using this option.
8
Set Future Delivery
You can have your message delivered at a future
specified time and date. See “Future Delivery” on
page 44 for instructions on using this option.
Cancel message and
Cancels the message and returns you to Step 2 on
page 37.
*
select new
destination
Cancels the message and returns you to the Main
Menu.
** Cancel and Return to
the Main Menu
Strata CIX40 Voice Processing User Guide 07/06
39
Send Messages
Reply to the Current Message
Reply to the Current Message
Your voice mail system lets you reply to a message that you are currently playing.
When you reply to a message, you do not have to select the source of the message
as a destination since your voice mail system “remembers” it. You can send the reply
to additional destinations.
When the originator(s) receives and plays the reply, he/she hears the prompt, “Reply
message from [name or User ID].”
Important! The Reply feature only works if the original message is sent from a
another voice mail user. When a voice mail user that has not logged on
to his/her mailbox leaves a message for you, you have to enter a
destination to respond.
1. From the Play Messages
Menu, press 6 Reply to
the current message.
You are prompted to record your reply to the message.
2. Record your reply after
the tone. When finished,
press #.
While recording, you can
press 4 to pause/resume
(toggle or 30 seconds)
the recording.
3. Press # again to send the
Your voice mail system tells you that your reply has
been sent and returns you to the Main Menu.
reply immediately
Important! If you press # to send your reply you
cannot use the special recording and
sending options.
...or before sending the
reply, you can use any of
the following options:
1
Review reply
The recording plays.
40
Strata CIX40 Voice Processing User Guide 07/06
Send Messages
Reply to the Current Message
2
3
Re-record
The system prompts you to record your reply at the
beep.
Press # when done.
Append reply
The appended reply plays after the already recorded
portion. The system prompts you to record at the
beep.
Press # when done.
4
Select Additional
Destinations
Send the message to additional destinations. You may
repeat this step as often as necessary.
Enter one of the
following
destinations:
Your voice mail system plays the user’s name or User
ID for confirmation.
• User ID and
press #. Press #
again to record a
reply without
playing the user’s
name.
Note If your voice mail system is designed with a
fixed length number for your User ID, do not
press # after entering a User ID. See your
System Administrator for specific operation of
your system.
You are prompted to enter the person’s name.
• 00 Directory
Your voice mail system plays the first name that
matches the combination of the letters you entered.
Enter the first few
letters of the first
or last name (Q =
7,
Z = 9).
Press # to select the
name as the
destination
...or 1 to hear the
next name
...or to cancel your
*
entry and re-
enter.
Strata CIX40 Voice Processing User Guide 07/06
41
Send Messages
Reply to the Current Message
You are prompted for the destination list number.
• 01 Personal List
Your voice mail system plays the list comment or
number for confirmation. See “Manage Your Lists” on
page 61 to create or revise a destination (distribution)
list.
Enter a list number
(1~7).
You are prompted for the destination list number.
• 02 System List
number for confirmation. Ask your System
Administrator for more information about System Lists.
Enter a list number
(1~7).
7
Special Delivery
Options
You can send a message as urgent, private, or with a
return receipt request. The settings can be used in any
message.
instructions on using this option.
8
Set Future Delivery
Cancel reply
You can have your message delivered at a future
specified time and date. See “Future Delivery” on
page 44 for instructions on using this option.
Cancels the reply and returns you to Step 2 on page
40.
*
Cancels the message and returns you to the Main
Menu.
** Cancel and Return to
the Main Menu
42
Strata CIX40 Voice Processing User Guide 07/06
Send Messages
Special Delivery Options
Special Delivery Options
You can send a message as urgent, private, or with a return receipt request. The
settings can be used in any combination and changed prior to sending the message.
When you send, forward or reply to a message, this option is available by pressing 7
Special Delivery Options.
ä Enter an option number:
1
2
Set Urgent status
(toggle)
Urgent messages play first in the New Message
Queue.
To remove the urgent
status, press 7
then 1 again.
Set Private status
(toggle)
Private messages cannot be forwarded.
To remove the
private status,
press 7 then 2
again.
3
9
Set Return Receipt
request (toggle)
Your voice mail system notifies you when and by
whom the message was received and plays the
original message.
To remove the return
receipt request,
press 7 then 3
again.
Note A message that is only partially heard (for
five seconds or longer) sends back a return
receipt to the sender.
Return to previous
menu
Your voice mail system returns you to the previous
menu.
Strata CIX40 Voice Processing User Guide 07/06
43
Send Messages
Future Delivery
Future Delivery
Your voice mail system can be configured so that your message is delivered at a
future specified time and date. After marking the message for future delivery, you can
review (play, save, delete) the message at any time before it is sent. See Chapter 3 –
Play Messages for instructions on using the Future Delivery Review option.
When you send, forward or reply to a message, this option is available by pressing 8
Set Future Delivery. You can choose any or all of the selections.
Each of these settings default to the current
time/date. To set a future delivery time, you do not
need to enter all the options. For example, if you
have recorded a message and want to have it
delivered that afternoon at 2:30 PM, you only
need to enter the hour (2), select PM and enter
the minutes (30) using options 1 and 2.
ä Enter an option number
and press #.
1
Set Hour (1~12)
Your voice mail system prompts you to select AM
or PM.
1
2
AM
PM
2
3
4
5
Set Minutes (0~59)
Set Day (1~31)
Set Month (1~12)
Set the Year (last two
digits)
Two-digit numbers under 80 will be set for the next
century. For example, enter 59 to set 2059.
9
Return to previous
menu
delivery time and date and returns you to the
previous menu.
Note You can review, continue to send (save), or
delete this message using the Future
Delivery Review option on the Play
Messages Menu. (See Chapter 3 – Play
Messages).
44
Strata CIX40 Voice Processing User Guide 07/06
Manage Mailbox
5
Your voice mail system provides special options to customize and manage your
mailbox features (menu shown below).
From the Main Menu:
3
Manage Mailbox
1
2
3
4
9
Change your Greeting
Change your User Options
Manage your Lists
Manage your Guest User IDs
Return to Main Menu
Strata CIX40 Voice Processing User Guide 07/06
45
Manage Mailbox
Change Your Greeting
Change Your Greeting
You can select either a personal or system greeting to play callers when you do not
answer or when your telephone is busy.
This section discusses the three basic greeting controls (menu shown below):
• Create or record over a personal greeting
• Change your greeting selection
• Review a greeting
From the Main Menu:
Manage Mailbox
From the Manage Mailbox Menu:
Change your Greeting
Select
System Greeting
Review selected greeting
~
for a Personal Greeting or
for the
Record (new) greeting
Review recording
Re-record
Not available
for System
greeting
Append to recording
Cancel recording
Save recording
Return to previous menu
Review current greeting
Return to previous menu
3608
46
Strata CIX40 Voice Processing User Guide 07/06
Manage Mailbox
Change Your Greeting
Create or Record Over a Personal Greeting
Personal greetings should be informative and advise callers when you will be
available to return their calls or respond to their messages. You can update personal
greetings as often as you want. You can store up to seven different recorded greetings
from which you can choose as your personal greeting. The System Administrator can
also schedule your greetings to play automatically at different times.
1. From the Manage
Mailbox Menu, press
1 Change your Greeting.
Your voice mail system prompts with a list of
options from the Change your Greeting Menu.
2. Enter a number from
Your greeting is identified by the number chosen.
For example, you can record a general greeting
as greeting 1, then record a greeting for holidays
as greeting 2. Later, you can choose which one
plays. You can re-record a greeting at any time.
1~7.
3. Press 2 to record the
greeting (speak slowly
and clearly).
The following information should be included in
your Personal Greeting:
©
©
©
©
©
©
Your name
Company and/or department
Date
Your availability
Instructions to leave a detailed message
Call coverage options
4. Press # when done.
Sample Greeting
“Hi. This is Mary Smith of the Toshiba Marketing
Department. It is Monday, June 19, and I am in the
office today. I am either on the telephone or have
stepped away for a few minutes and your call has
been forwarded to my voice mailbox. If at the tone
you leave a detailed message and a telephone
number where I can reach you, I will be happy to
return your call.”
Strata CIX40 Voice Processing User Guide 07/06
47
Manage Mailbox
Change Your Greeting
5. (Optional) After
recording, you can press:
1
2
Review recording
Re-record
The complete greeting plays.
The system prompts you to record at the beep.
Press # when done.
3
Append recording
Appending a greeting enables you to add
information to the end of your already recorded
greeting. The system prompts you to record at the
beep.
Press # when done.
4
9
Cancel recording
Save recording
The greeting is canceled. The system returns to
the previous menu.
Your voice mail system tells you that greeting
(number) has been recorded and returns to the
previous menu. Again, you are given the option to
review or record over the greeting you have just
recorded.
6. Press 9 to return to the
You are given the option to record another
greeting.
previous menu.
7. Press 1 and select
another greeting number
(1~7).
8. Repeat Step 3 on page
Important! The last greeting selected or
recorded is the greeting that callers
hear as your User ID greeting.
47.
9. To return to the Main
Your voice mail system plays the Main Menu
options.
Menu, press 999.
48
Strata CIX40 Voice Processing User Guide 07/06
Manage Mailbox
Change Your Greeting
Change Your Greeting Selection
1. From the Main Menu,
Your voice mail system plays the Manage Mailbox
Menu.
press 3 Manage Mailbox.
2. Press 1 Change your
Your voice mail system prompts with a list of
options from the Change Your Greeting Menu.
Greeting.
3. Enter a personal greeting
number (1~7)
Your callers hear the system greeting when you
do not answer or when your telephone is busy.
...or # to select the
system greeting.
Note If you have recorded a busy greeting, this
greeting does not play when your telephone
is busy (see “Create or Record Over Your
Busy Greeting” on page 55 for details).
Important! The last greeting selected or
recorded is the greeting that callers
hear as your User ID greeting.
The current greeting plays.
...or to review the
current greeting.
*
4. Press 9 to return to the
Your voice mail system returns to the previous
menu.
previous menu
...or 99 to return to the
Manage Mailbox Menu
You can select another user Manage Mailbox
option.
...or 999 to return to the
Main Menu.
You can select another Main Menu option.
Strata CIX40 Voice Processing User Guide 07/06
49
Manage Mailbox
Change Your Greeting
Review a Greeting
1. From the Main Menu,
Your voice mail system plays the Manage Mailbox
Menu.
press 3 Manage Mailbox.
2. Press 1 Change your
Your voice mail system plays a list of options from
the Change Your Greeting Menu.
Greeting.
3. Press to review the
The current greeting plays. Your voice mail
system prompts you with the Change Your
Greeting Menu options.
*
current greeting
Note Pressing does not affect the current
*
greeting selection.
The greeting plays. Your voice mail system
prompts you with the Change Your Greeting Menu
options.
...or enter a number from
1~7, then press 1 to
review the greeting. Press
9 to return to previous
menu.
4. Press 9 to return to the
You can select another user Manage Mailbox
option.
Manage Mailbox Menu
...or 99 to return to the
Main Menu.
You can select another Main Menu option.
50
Strata CIX40 Voice Processing User Guide 07/06
Manage Mailbox
Change Your User Options
Change Your User Options
Your voice mail system provides a number of special options to improve time
management and productivity (menu shown below). For example, the DND feature
can provide blocks of time for meetings or projects uninterrupted by the ringing of a
telephone.
From the Main Menu:
Record
Manage Mailbox
Review recording
From the Manage Mailbox Menu:
Re-record
Change your User Options
Append recording
Change your Do Not Disturb (On/Off)
Cancel recording
Change your Call Screening (On/Off)
Save recording
Change your Security Code
Select your Busy Greeting (toggle)
Record your Busy Greeting
Record your Name
Enter notification template number
Change message Notification
Review your Option Settings
Return to previous menu
Enable/Disable notification
template (toggle)
Change notification digits
Save changes
Return to previous menu
3612
Important! If you do not hear all the options for this menu, they may not be
configured for your telephone or system. Please ask your System
Administrator to verify which user options are available to you.
Strata CIX40 Voice Processing User Guide 07/06
51
Manage Mailbox
Change Your User Options
Change Your Do Not Disturb (DND) Setting
If you set this feature to on, your voice mail system automatically sends calls to your
User ID (mailbox) without first ringing your telephone. The System Administrator can
also set this feature to turn on or off automatically at pre-scheduled times and/or days
of the week.
1. From the Main Menu,
Your voice mail system plays the Manage Mailbox
Menu.
press 3 Manage Mailbox.
2. Press 2 Change your User
Options.
3. Press 1 Change your Do
A prompt verifies the current status of the feature.
Not Disturb (On/Off).
Important! DND on the your voice processing
system is different from the DND
features for your telephone system.
If your telephone comes with a DND
button or feature, it works
independently from this feature on
your voice mail system.
4. (Optional) Press 1 again
to reset the feature, if
required.
Pressing 1 toggles the DND feature On and Off.
5. Press 9 to return to the
You can select another user Manage Mailbox
option.
Manage Mailbox Menu
...or 99 to return to the
Main Menu.
You can select another Main Menu option.
52
Strata CIX40 Voice Processing User Guide 07/06
Manage Mailbox
Change Your User Options
Change Your Call Screening Setting
If you set this feature to on, your voice mail system asks callers for their name and
company. Without the caller’s knowledge, the system relays that information to you
and provides you with special options to handle the call (menu shown below).
1
2
Receive the call
Reject the call and let the call forward
to your mailbox
3
4
Transfer the call to another extension
with an announcement
Transfer the call to another extension
without an announcement
The System Administrator can also set this feature to turn on or off automatically at
pre-scheduled times and/or days of the week.
1. From the Main Menu,
Your voice mail system plays the Manage Mailbox
options.
press 3 Manage Mailbox.
2. Press 2 Change your User
Options.
3. Press 2 Change your Call
A prompt verifies the current status of the feature.
Screening (On/Off).
4. (Optional) Press 2 again
to reset the feature, if
required.
Pressing 2 toggles the Call Screening feature On
and Off.
5. Press 9 to return to the
You can select another user Manage Mailbox
option.
Manage Mailbox Menu
...or 99 to return to the
Main Menu.
You can select another Main Menu option.
Strata CIX40 Voice Processing User Guide 07/06
53
Manage Mailbox
Change Your User Options
Change Your Security Code
Each User ID in the system has a security code. The code must be entered by you in
order to “log on” to your User ID mailbox, enabling you to access your messages,
settings, greetings, etc.
Note You can change your security code as often as you wish to ensure the privacy
of your messages and personal greetings.
1. From the Main Menu,
Your voice mail system prompts with a list of
press 3 Manage Mailbox. options from the Manage Mailbox Menu.
2. Press 2 Change your
Your voice mail system prompts with a list of
options from the Change your User Options
Menu.
User Options.
3. Press 3 Change your
Your voice mail system prompts you to enter your
new security code.
Security Code.
4. Enter your new security
The minimum and maximum number of digits for
the security code are determined by your System
Administrator. Please ask your System
code + #.
Administrator for confirmation on the number.
Your voice mail system prompts you to re-enter
your new security code for verification.
5. Re-enter your new
After entering the security code a second time,
your voice mail system announces that your
security code has been changed.
security code + #.
54
Strata CIX40 Voice Processing User Guide 07/06
Manage Mailbox
Change Your User Options
Create or Record Over Your Busy Greeting
You can record your own custom busy greeting that plays when callers reach your
extension and it is busy. While your callers are listening to the busy greeting, they can
enter a different User ID, press to hold (if configured for your mailbox by the System
*
Administrator), or remain on the line to leave a message.
Note Depending on the configuration of your telephone and telephone system,
Stratagy may not receive a busy tone when callers reach your extension. If
Stratagy doesn’t receive a busy tone, your selected personal greeting plays
instead.
If a custom greeting is not recorded, the default system busy greeting plays.
1. From the Main Menu,
Your voice mail system plays the Manage Mailbox
options.
press 3 Manage Mailbox.
2. Press 2 Change your User
Options.
3. Press 5 Record your Busy
Your voice mail system prompts you to record
your custom busy greeting.
Greeting.
4. Begin recording at the
tone. Press # when done.
5. (Optional) After
recording, you can press:
1
2
Review greeting
Re-record
The complete greeting plays.
The system prompts you to record at the beep.
Press # when done.
Append recording
3
The system prompts you to record at the beep.
The appended greeting plays after the already
recorded portion of the greeting.
Press # when done.
4
9
Cancel recording
The greeting is canceled. The system returns to
the previous menu.
Save recording
Your voice mail system tells you that the greeting
has been saved and returns to the previous menu.
Strata CIX40 Voice Processing User Guide 07/06
55
Manage Mailbox
Change Your User Options
6. Press 9 to return to the
You can select another user Manage Mailbox
option.
Manage Mailbox Menu
...or 99 to return to the
Main Menu.
You can select another Main Menu option.
Select Your Busy Greeting
1. From the Main Menu,
Your voice mail system plays the Manage Mailbox
press 3 Manage Mailbox.
options.
2. Press 2 Change your User
Options.
3. Press 4 Select your Busy
A prompt verifies the current status of the feature.
Greeting (toggle).
4. (Optional) Press 4 again
to reset the feature, if
required.
Pressing 4 toggles between selecting your
custom busy greeting and the system busy
greeting.
5. Press 9 to return to the
You can select another user Manage Mailbox
option.
Manage Mailbox Menu
...or 99 to return to the
Main Menu.
You can select another Main Menu option.
56
Strata CIX40 Voice Processing User Guide 07/06
Manage Mailbox
Change Your User Options
Record Your Name
Your name is announced whenever you log onto your mailbox, the directory is
accessed, the system greeting is selected, or when a message is sent by another
voice mail user.
Your voice mail system prompts you through the entire recording sequence. You can
re-record your name at any time simply by repeating these steps.
Notes
l
l
Your voice mail system may not be configured to play your name
when you log on to your mailbox.
Your system may be programmed such that you need to record your
extension as well as your name. Ask your System Administrator for
the requirements of your system.
1. From the Manage
Mailbox Menu, press
2 Change your User
Options.
Your voice mail system prompts with Change your
User Options Menu.
2. Press 6 Record your
Your voice mail system prompts you to record
your name.
Name.
3. At the tone, state your
name slowly and clearly
(and your extension, if
required).
Press # when done.
4. (Optional) After
recording, you can press:
1
2
Review recording
Re-record
Your newly recorded name (and extension) plays.
You can re-record your name (and extension) as
often as you wish.
Press # when done.
Strata CIX40 Voice Processing User Guide 07/06
57
Manage Mailbox
Change Your User Options
3
Append recording
You can add a short comment that plays at the
end of the recording (for example, a vacation
announcement).
Press # when done.
4
9
Cancel recording
You can cancel your newly recorded name (and
extension) and return to the previous menu.
Save recording
Your voice mail system confirms that your name
(and extension) has been recorded and returns to
the previous menu.
Change Your Message Notification
Your User ID can have up to 10 notification records programmed by the System
Administrator with a specific notification method (message waiting lights, pagers,
voice, etc.) and the time/day when that notification record applies. The repeat count
(how many times the notification is attempted) and interval for retrying the notification
is also set.
Once you have turned on the notification record numbers, your voice mail system
automatically calls you at the designated number and with the chosen notification
method.
Using the Change Message Notification option, you can enable/disable a notification
method and/or change the notify phone number.
1. From the Main Menu,
Your voice mail system plays the Manage Mailbox
options.
press 3 Manage Mailbox.
2. Press 2 Change your User
Options.
3. Press 7 Change message
Notification.
58
Strata CIX40 Voice Processing User Guide 07/06
Manage Mailbox
Change Your User Options
4. Enter the notification
Stratagy confirms the template number, spells the
template number (1~10).
template title, states whether the template is
enabled or disabled, and tells you the phone
number (if applicable).
Note To select the correct notification template,
you need to keep a written record of the
template number and function for each
template you will be changing.
5. Press an option number:
1
Enable/disable
notification template
(toggle)
Pressing 1 toggles the notification template
between Enable and Disable. After pressing 1, a
prompt verifies the current status.
2
Change notification
digits. Enter the new
notification telephone
number’s digits and
press #.
Your voice mail system verifies the telephone
number entered.
#
9
Save changes
Your voice mail system tells you that the
notification template changes have been saved.
Your voice mail system returns to the previous
menu.
Return to previous
menu
Your voice mail system cancels the change
message notification options and returns to the
previous menu.
6. Press 9 to return to the
You can select another user Manage Mailbox
option.
Manage Mailbox Menu
...or 99 to return to the
Main Menu.
You can select another Main Menu option.
Strata CIX40 Voice Processing User Guide 07/06
59
Manage Mailbox
Change Your User Options
Review Your Option Settings
1. From the Main Menu,
Your voice mail system plays the Manage Mailbox
options.
press 3 Manage Mailbox.
2. Press 2 Change your User
Options.
3. Press to Review your
Your voice mail system verifies the status of your
DND, Call Screening options and plays your
selected busy message and name recording.
*
Option Settings.
4. Press 9 to return to the
You can select another user Manage Mailbox
option.
Manage Mailbox Menu
...or 99 to return to the
Main Menu.
You can select another Main Menu option.
60
Strata CIX40 Voice Processing User Guide 07/06
Manage Mailbox
Manage Your Lists
Manage Your Lists
Your voice mail system provides the ability to create and manage up to seven
personal distribution lists. The lists consist of the User IDs to which you most
frequently send messages.
At the time you create a list, you are given the option of recording a “list comment” that
serves as a title or name for the list. The comment plays each time you use the list to
confirm that you have chosen the correct distribution list.
From the Manage Your Lists Menu (shown below), you can review the list contents,
add and delete User IDs to the list, and record a list comment to help you identify the
list.
From the Main Menu:
3
Manage Mailbox
From the Manage Mailbox Menu:
3
Manage your Lists
1
7
Select
~
for a Personal List
1
2
3
4
9
Review your current list
Add a User ID to the list
Delete a User ID from the list
Record a list Comment
Return to previous menu
9
Return to previous menu
1. From the Main Menu,
Your voice mail system plays the Manage Mailbox
Menu.
press 3 Manage Mailbox.
2. Press 3 Manage your
Lists.
3. Select the desired list
You are prompted to enter an option.
number 1~7.
Strata CIX40 Voice Processing User Guide 07/06
61
Manage Mailbox
Manage Your Lists
4. After selecting a list, you
can press:
1
Review your current
list
The system prompts you with the name (and
extension) of each User ID on the list.
2
Add a User ID to the
list
Your voice mail system prompts you to enter the
User ID.
The name (and extension) plays. You can add
additional User IDs as needed.
Enter the User ID.
Press # when
done.
3
4
Delete a User ID from
the list
Your voice mail system prompts you to enter the
User ID.
The name (and extension) plays. The system
prompts “Deleted.”
Enter the User ID.
Press # when
done.
Record a list Comment
When sending a message, the comment plays
each time the destination list is selected. Your
voice mail system prompts you to record the
comment.
Record your
comment. Press
# when done.
5. Press 9 to return to the
Your voice mail system returns to the previous
menu.
previous menu
You can select another Manage Mailbox option.
...or 99 to return to the
Manage Mailbox Menu
You can select another Main Menu option.
...or 999 to return to the
Main Menu.
62
Strata CIX40 Voice Processing User Guide 07/06
Manage Mailbox
Manage Guest User IDs
Manage Guest User IDs
Guest User IDs provide limited access to the voice mail system for temporary and
project-oriented employees, such as consultants and contractors. Guest users can
only send messages to their Host User ID and other guests of their Host User ID.
The Guest User IDs are selected from a system-generated list and assigned on a per-
use basis. See your System Administrator for details if you have this feature.
Managing Guest User IDs involves creating and deleting these IDs (menu shown
below).
From the Main Menu:
Manage Mailbox
From the Manage Mailbox Menu:
Manage Guest Mailboxes
Create a Guest Mailbox
Delete a Guest Mailbox
Review your Guest Mailboxes
Return to previous menu
3498
1. From the Main Menu, press
Your voice mail system plays the Manage Mailbox
Menu.
3 Manage Mailbox.
2. Press 4 Manage Guest User
Your voice mail system plays the Manage Guest
User IDs Menu.
IDs.
3. Select one of the following:
1
2
Create a Guest User ID
The system prompts with a Guest User ID
number. Be sure to make a note of the number
and the person you assign.
Delete a Guest User ID
Your voice mail system prompts you to enter the
User ID.
The system confirms the Guest User ID is
deleted.
Enter the User ID. Press
# when done.
Strata CIX40 Voice Processing User Guide 07/06
63
Manage Mailbox
Use Guest User IDs
3
Review your Guest
User IDs
The system lists your Guest User ID numbers.
4. Press 9 to return to the
You can select another user Manage Mailbox
option.
Manage Mailbox Menu
...or 99 to return to the
Main Menu.
You can select another Main Menu option.
Use Guest User IDs
Instruct your guest users to call the voice mail system and identify themselves as
guest users of your mailbox. Only then can they use voice mail to send, receive, and
reply to the messages with your mailbox (Host ID) as a typical voice mail user.
Note See “Access Your Mailbox” on page 14 for more detailed instructions of the
following steps.
1. Call the voice mail
system.
2. Enter 998 + #.
Note Check with your System Administrator for
the User ID (default 998) configured for
your system.
3. Enter the Host User
The Host User ID’s greeting plays.
ID + #.
Note Your voice mail system uses the
combination of the Host User ID and the
Guest User ID to identify the caller as your
guest.
4. Enter + the Guest User
*
ID + #.
5. Enter the security
code + #.
64
Strata CIX40 Voice Processing User Guide 07/06
Integration Features
6
This chapter covers the use of your voice mail with the Strata CIX40. Call Forward,
Message Waiting, CIX Integration, Direct Transfer to Voice Mail, Voice Mail
Conference features, and Call Monitor are all described.
Call Forward
Note See Strata CIX DKT/IPT Telephone User Guide for additional information on
programming and using this feature on your phone.
There are two types of Call Forwarding: System and Station.
• System Call Forward (which is set in Programming) automatically directs calls to a
predefined location, such as Voice Mail.
extension on your phone. Each extension can be independently set for a different
Call Forward feature. You can set a flexible button to perform any Call Forward
function.
Call Forward must be set prior to receiving the call.
Note Station Call Forward takes priority over System Call Forward.
Table 1 on page 66 contains the Call Forward Button sequences for performing Call
Forward. There are two ways to perform each Call Forward function. One, enter the
button sequence as described, or two, program a flexible button to perform the
sequence.
ä To use the Call Forward button sequence
ä
Follow the instructions in Table 1 below shown under “Button Sequence.” Some
features require additional input, such as:
Strata CIX40 Voice Processing User Guide 07/06
65
Integration Features
Call Forward
©
©
Destination – If the destination is an outside number, press # after
entering the destination. The CIX accepts destination numbers of up to 32
digits.
Timer – This is a two digit entry representing how long (8 to 160 seconds)
your telephone should ring before forwarding the call. If you enter one
digit, you must press # after entering the single digit.
Also, in the following table, (Tone) means that a confirmation tone plays at that point in
the sequence.
Table 1
Call Forward Procedures
Feature
Button Sequence
Call Forward - Station
Call Forward Any Call (Internal and Incoming Line)
All Call
Press Extension button + #6011 (Tone) + Destination No. (Tone)
Press Extension button + #6021 (Tone) + Dest. No. (Tone)
Press Extension button + #6031 (Tone) + Dest. No. (Tone) + Timer + #
Press Extension button + #6041 + Dest. No. + Timer + #
Press Extension button + #6051 (Tone)
Busy
No Answer
Busy No Answer
Cancel
Call Forward - System
Call Forward - Incoming Line Calls
All Calls
Busy
Extension button + #6013 (Tone) + Dest. No. (Tone)
Extension button + #6023 (Tone) + Dest. No. (Tone)
Extension button + #6033 + Dest. No. (Tone) + Timer (Tone) + #
Extension button + #6043 + Dest. No. (Tone) + Timer (Tone) + #
Extension button + #6053 (Tone)
No Answer
Busy No Answer
Cancel
Call Forward - System
Activate
#620 (Tone)
Cancel
#621 (Tone)
66
Strata CIX40 Voice Processing User Guide 07/06
Integration Features
Message Waiting
Message Waiting
Use your Msg LED/button and LCD to see/retrieve message(s).
An extension can receive up to four simultaneous Message Waiting indications and
LCD messages. One message is reserved for the Message Center.
Your phone can be programmed to have up to four additional (flexible) Message
Waiting buttons/LEDs. Ask if these buttons have been programmed on your phone. If
so, substitute them when the Msg button/LED is mentioned in the following steps.
Responding to a Lit Msg LED
1. On an LCD phone, if you see a “+” press Scroll to display additional messages;
otherwise, go to Step 2. The “+” indicates additional messages. The LCD can show up
to three station messages for your extension and three for each additional (phantom)
extension that you may have.
2. Press Msg, then lift the handset. Your phone rings the extension or voice mail device
that sent the indication. The LED continues to flash red.
3. After answering the message(s), place the handset back on-hook.
4. If the Msg LED continues to flash, you have more messages; repeat Steps 1~3 above
to retrieve them. Voice mail devices turn off the LED/LCD indications after a short
delay, after you checked all messages.
5. To manually turn off your Msg LED, press your extension button, then press #409.
Do this step for each message received.
Strata CIX40 Voice Processing User Guide 07/06
67
Integration Features
CIX Integration
Turning On/Off Message Waiting LED on Another Exten-
sion
If you call an extension and it’s busy or there is no answer, you can light that
extension’s Message Waiting LED and enable that extension to call you back.
1. Dial an internal extension. You hear busy tone or there’s no answer.
2. Press Msg or 7. The Msg LED flashes red on the called phone. At your phone, the
Msg LED lights steady red and the LCD shows the station number where you set a
Message Waiting light.
3. Press Spkr. Your Msg LED turns Off. The Msg LED on the called telephone flashes
until the called party presses the flashing Msg button - which calls you back.
4. To turn Off a Message LED that you have set on another extension, press #64 plus the
extension number that has the message light set. Then hang up to release your
telephone.
CIX Integration
If your company’s Toshiba Strata CIX phone system has the Proprietary Integration
with your voice mail enabled, you have two additional features at your disposal—Soft
Key Control of Voice Mail and Call Record to Voice Mail. If you cannot access these
features, check with your System Administrator.
Soft Key Control of Voice Mail
If you have a Strata 3000-series digital phone equipped with a Liquid Crystal Display
(LCD), many standard functions of the voice mail system can be displayed on the
digital telephone LCD and operated by Soft Keys. Feature prompting makes voice
mail functions easy to use via visual displays on the telephone in place of listening to
voice prompts over the handset, although the voice prompts still play when soft keys
are used.
Note For general information on using Soft Keys on your phone, please see the
Strata CIX DKT/IPT Telephone User Guide.
68
Strata CIX40 Voice Processing User Guide 07/06
Integration Features
CIX Integration
When your telephone is idle, and a message
arrives for an extension on your phone, the Msg
LED is activated for the appropriate extension and
updates the LCD with this display (shown right). If
urgent messages are in the extension’s mailbox,
the SAVED display is replaced with the number of
URGENT messages.
Mode
Page
Feature
1 NEW/5 SAVED
Scroll
DIRECT SS
SYSTEM SD
PERSONAL SD
EXTERNAL DIR
INTERNAL DIR
5951
Soft Keys
Soft Keys
Once connected to your voice mailbox, the LCD
displays the Main Menu options (shown at right).
See Table 2 on page 70 below for a list of Main
Menu soft keys.
Mode
Page
Feature
Scroll
VOICE MAIL MAIN MENU
3 NEW / 2 SAVED
SEND
PLAY MSGS
MANAGE MBX
HANGUP
EXIT
5951
Soft Keys
Soft Keys
You are then able to perform many of the standard
voice mail functions using the Soft Keys on your
phone (Play Messages menu example shown at
right). See Table 3 on page 70 for a list of Soft
Keys.
Mode
Page
Feature
Scroll
FRM: 5555
MSG LENGTH: 00:54
NEXT
REPLAY
PREVIOUS
FORWARD
SAVE
DELETE
SPL FUNCT
GO FORWARD
PREV MENU
BACKUP
PAUSE PLAY
5953
Soft Keys
Soft Keys
Strata CIX40 Voice Processing User Guide 07/06
69
Integration Features
CIX Integration
Table 2
Voice Mail Main Menu Soft Keys for CIX Digital Telephones
DKT 3007 SD
DKT 3010 SD
DKT 3020 SD
IPT1020 SD
DKT 2010 SD
DKT 2020 SD
DKT 3014 SDL
Voice Mail Functions
PLAY MSGS
SEND
PLAY
SEND
MGMT
PLAY
SEND
MGMT
EXIT
Play Messages
Send Messages
Manage Mailbox
Exit Mailbox
MANAGE MBX
EXIT
HANGUP
QUIT
QUIT
Disconnect from GVPH
Table 3
Voice Mail Soft Keys for CIX Digital Telephones
DKT 3007 SD
DKT 3010 SD
DKT 3020 SD
IPT1020 SD
DKT 2010 SD
DKT 2020 SD
DKT 3014 SDL
Voice Mail Functions
ADD
ADD
ADD
ADD
Create a Guest Mailbox
ADD DESTS
ADD MBX
AM
Additional Destinations
Add a mailbox to the list
AM
ADD
AM
ADD
AM
APPEND
APPD
APPD
RECB
RGRT
SCRN
CRTN
Append recording
BSY GRT REC
BUSY GREET
CALL SCREEN
CANCEL
Record Busy Greeting
Select Busy Greeting (toggle)
Change Call Screening (On/Off)
Cancel recording
SCRN
CANC
Cancel message and select new
destination
CANCEL MSG
CANC
CHANGE
CHNO
GRT
CHNO
GRT
Change notification digits
Change Greeting
CHG GREETING
CONT DELETE
CONT PLAY
CDEL
CDEL
CPLY
DATE
Continuous Delete
Continuous Play
DATE & TIME
DATE
Message Date and Time
70
Strata CIX40 Voice Processing User Guide 07/06
Integration Features
CIX Integration
Table 3
Voice Mail Soft Keys for CIX Digital Telephones (continued)
DKT 3007 SD
DKT 3010 SD
DKT 3020 SD
IPT1020 SD
DKT 2010 SD
DKT 2020 SD
DKT 3014 SDL
Voice Mail Functions
DELETE
DEL
DEL
DEL
Delete the message/guest mailbox
Delete a mailbox from the personal
distribution list
DELETE MBX
DEL
DELETE MSG
DIRECTORY
DND
DMSG
DIR
DMSG
DIR
Delete message (Future Delivery Review)
Directory plus name
DND
DND
Change Do Not Disturb (On/Off)
Enable/Disable:
ENABLE
EDNO
FWD
EDNO
• Notification template (toggle)
• Automatic copy
FORWARD
FWD
Forward the current message
Set Future Delivery, Future Delivery
Review
FUTURE DLVR
FUTR
GO FORWARD
GUEST MBXES
MARK PRIVAT
MARK URGENT
MSG NOTIFY
MULTI ENTRY
NAME RECORD
NEXT
Go forward (advance)
Manage Guest Mailboxes
Set Private status (On/Off)
Set Urgent status (On/Off)
Change message Notification
Multiple Destinations
GST
PRV
PRV
URG
URG
NOTE
MULT
NAME
NEXT
MULT
Record your Name
NEXT
Play next message
Play next message (Future Delivery
Review)
NEXT MSG
NMSG
NMSG
NO
NO
PAUS
LIST
LIST
PM
NO
PAUS
LIST
LIST
PM
Continuous Delete
PAUSE
Pause recording
PER DST LST
PERSNL LIST
PM
Manage Personal Distribution Lists
Personal distribution list (1~7)
PM
Strata CIX40 Voice Processing User Guide 07/06
71
Integration Features
CIX Integration
Table 3
Voice Mail Soft Keys for CIX Digital Telephones (continued)
DKT 3007 SD
DKT 3010 SD
DKT 3020 SD
IPT1020 SD
DKT 2010 SD
DKT 2020 SD
DKT 3014 SDL
Voice Mail Functions
PREVIOUS
PREV MENU
REC COMMENT
RECORD
PREV
MENU/PREV
COMM
REC
Play the Previous message
Return to previous menu
Record a list Comment
Record
PREV
COMM
REC
REPLAY
RMSG
REPL
RREC
RTRC
REVW
REVW
ROPT
SAVE
SMSG
CODE
SEND
DAY
Replay current message
Reply to the current message
Re-record
REPLY
REPL
RREC
RTRC
REVW
REVW
RE RECORD
RETRN RECPT
REVIEW
Set Return Receipt request (On/Off)
Review recording/guest mailboxes
Review current list
REVIEW LIST
REV OPTIONS
SAVE
Review Option Settings
Save the message/recording/changes
Save message (Future Delivery Review)
Change Security Code
Send and Return to Main menu
Set the Day (1~31)
SAVE
SMSG
CODE
SEND
DAY
SAVE MSG
SECURTY COD
SEND MSG
SET DAY
SET HOUR
SET MINUTES
SET MONTH
SET YEAR
SPCL FUNCT
SPCIAL SEND
STOP
HOUR
MIN
HOUR
MIN
Set the Hour (1~12)
Set the Minutes (0~59)
Set up Month (1~12)
MTH
MTH
YEAR
SPCL
SPCL
STOP
OPTN
YES
YEAR
SPCL
SPCL
STOP
OPTN
YES
Set up Year (last two digits)
Special Functions
Special Delivery Options
End recording
USER OPTNS
YES
Change User Options
Continuous Delete
72
Strata CIX40 Voice Processing User Guide 07/06
Integration Features
CIX Integration
Call Record to Voice Mail
While on an active call, a station user can record the conversation and store it in a
voice mailbox. Recordings can also be paused or restarted. Depending upon your
System Administrator, you are given either a manual method of recording that allows
you to designate the mailbox where the recording will be sent or an auto method that
automatically sends the recording to a predefined mailbox that is assigned to the
phone you are using. This may be your personal mailbox.
Note Ask your System Administrator which method you need to use when recording
a call.
This feature requires the presence of a Record and a PS/RES (Pause/Resume)
button on your telephone. Feature codes are not available.
Important! Voice mailboxes have a definable limit on the length one message can
be. If you plan on doing lengthy recordings using this feature, see your
System Administrator so your message recording time can be properly
defined.
ä
To record a call
1. With a call in progress, press Record.
If you are using the auto method, the Record LED flashes rapidly and there is
approximately a one second interval (in extreme busy conditions, up to five seconds)
before the recording starts and the Record LED changes to the in-use interval flash
rate. You are now recording. Continue to Step 3.
...or if you are using the manual method, the Record LED flashes green rapidly.
Continue to Step 2.
2. (Manual method only) If you want to record the call to the predefined mailbox
associated with the phone you are using, press #. The Record LED flashes rapidly and
there is approximately a one second interval (in extreme busy conditions, up to five
seconds) before the recording starts and the Record LED changes to the in-use interval
flash rate. You are now recording.
...or if you want to record this call to another mailbox, enter the mailbox number
(usually the extension number). Finish by pressing #. The Record LED flashes rapidly
and there is approximately a one second interval (in extreme busy conditions, up to
five seconds) before the recording starts and the Record LED changes to the in-use
interval flash rate. You are now recording.
Strata CIX40 Voice Processing User Guide 07/06
73
Integration Features
Direct Transfer to Voice Mailbox
3. To stop recording, press Record. The LED turns off and the recording stops. To
resume recording at this point, you need to begin a new recording, see Step 1 on
previous page.
Pause/Resume Recording
You can pause the recording while continuing the conversation by pressing PS/RES.
The PS/RES LED flashes red. Your conversation is no longer being recorded.
To resume recording as part of the same message, press the PS/RES button again.
You can pause and resume indefinitely throughout the conversation. The only limit
may be a message length imposed by the voice mail system.
Direct Transfer to Voice Mailbox
An internal user on the Strata CIX can transfer a call directly to another person’s voice
mailbox without waiting for the call to forward from the called party’s telephone. The
voice mailbox does not even need to be associated with an active telephone in the
Strata CIX.
Direct Transfer to Voice Mail simplifies getting a call for a busy or absent employee to
his/her mailbox. It eliminates the need for the caller to enter the desired mailbox
number after being connected to the voice mail system.
ä
To transfer a call directly to Voice Mail (VM)
1. While on a call, press Cnf/Trn. You hear feature dial tone.
2. Press Direct Transfer to VM or enter #407. You hear entry tone.
3. Enter the VM mailbox number (usually the same as the extension number), then press
#. The call transfers immediately and your extension becomes idle. The transferred
party hears the greeting associated with the specified mailbox and can then leave a
message.
Note See Strata CIX DKT/IPT Telephone User Guide for information on
programming this feature on your phone.
Voice Mail Conference
Voice Mail ports may be included in conference calls. This enables all members of the
conference to listen to and play voice mail messages.
74
Strata CIX40 Voice Processing User Guide 07/06
Integration Features
Call Monitor
Call Monitor
Using the flexible Call Monitor button on your telephone, you can listen to the
message a caller is recording in your voice mailbox. You can also answer the call and
talk to the caller anytime during the message recording.
ä To enable Call Monitor on your telephone
1. While on hook, press the idle Call Monitor button. The button’s LED flashes red.
2. Enter your voice mail password (maximum of 16 digits; numbers 0~9).
3. Press #. The password displays with . The LCD now displays “Call Monitor
*
Enabled” briefly and then displays the original information. The Call Monitor LED
turns solid red indicating that the feature is enabled.
ä To disable Call Monitor on your telephone
ä
With the Call Monitor LED solid red, press Call Monitor. The Call Monitor LED
turns off.
ä To monitor a call using Call Monitor
A flashing red Call Monitor LED indicates that a message is being recorded in voice
mail.
ä
Using the speakerphone or handset, press Call Monitor. The Call Monitor LED
lights green. You can hear the caller leaving the message, but the caller cannot hear
you. The LCD displays “Monitoring Voice Mail.”
ä To answer the call during the message recording
ä
To talk to the caller during the recording, press Call Monitor. The recording stops
and the LED turns solid red. The LCD display indicates the extension or line to
which you are connected.
Strata CIX40 Voice Processing User Guide 07/06
75
This page is intentionally left blank.
Glossary
This glossary defines frequently-used voice processing system features and functions.
Term
Busy Greeting
Definition
You can select your custom busy or the system busy greeting
for callers to hear when your telephone is busy. If you do not
record your custom busy greeting, the system busy greeting
automatically plays.
You can record a live call into your mailbox from your Strata CIX
telephone.
Call Record
Call Screening operates in on/off mode. When on, your voice
mail system asks callers for their name and company. Without
the caller’s knowledge, the system relays that information to
you. You can decide to receive the call, let the call forward to
your mailbox, or transfer the call to another extension with or
without announcement.
Call Screening
Someone who calls into the voice mail system. A caller can
obtain information, leave a message for someone, and/or
provide information.
Caller
The telephone user the caller reached. See “User.”
Called Party
Strata CIX40 Voice Processing User Guide 07/06
77
Glossary
Directory ~ New Message Queue
Term
Definition
A caller enters digits corresponding to the first few letters of a
user’s name and your voice mail system plays the recorded
name (and optionally extension) that matches the entered
digits. Your voice mail system offers the caller the option of
selecting the name and being transferred or hearing the next
name.
Directory
Do Not Disturb operates in on/off mode. When on, your voice
mail system automatically sends calls to your User ID (mailbox)
without ringing your telephone first.
Do Not Disturb (DND)
Dual Tone Multi-frequency.
DTMF
Messages play in either FIFO or LIFO order. FIFO plays
messages from oldest to newest.
FIFO (First In, First Out)
With future delivery, you can arrange for your message to be
delivered at a specific time and date in the future. Once you
send the message, you can use the Play Messages—Future
Delivery Review option to review, continue to send, or delete
the message.
Future Delivery
voice mail system
Guest User IDs provide limited access to the
Guest User ID
for temporary and project-oriented employees, such as
consultants and contractors. Guest users can only send
messages to their Host User ID and other guests of their Host
User ID.
Messages play in either LIFO or FIFO order. LIFO plays
messages from newest to oldest.
LIFO (Last In, First Out)
See User ID.
Mailbox (User ID)
Name Recording
Your name (and optionally, extension) recording is used for the
directory, system greeting, and User ID.
There are two message queues: new and saved. The new
message queue contains unheard and partially heard
messages. When playing new messages, urgent messages
always play first.
New Message Queue
78
Strata CIX40 Voice Processing User Guide 07/06
Glossary
Personal Greetings ~ System Greeting
Term
Definition
You may record up to seven personal greetings that are played
for callers when you are unavailable. Although only one
greeting can be in effect at any one time, you can switch
between the greetings by entering the greeting number, or pre-
schedule different greetings to play at a certain time and/or day.
Personal Greetings
Greetings can be reviewed or re-recorded. You can also select
the default system greeting.
You can create/modify up to seven personal destination
(distribution) lists of User IDs and record a list comment for
identification. When sending messages, you can select a User
ID, personal list, system list, and/or the directory as the
destination.
Personal List
You can mark a message “private,” meaning the message
cannot be forwarded by the recipient to another user. The
recipient is told the message has the Private attribute set when
listening to his/her messages.
Private Messages
Return Receipt
When sending, forwarding, or replying to a message, you can
request a return receipt. Your voice mail system notifies you
when and by whom the message was received. The recipient is
not notified that receipt verification was requested and cannot
circumvent the procedure.
There are two message queues: new and saved. The saved
message queue contains messages that you saved or that
were automatically saved by the system. Messages flagged to
be saved are moved to the saved message queue after you
have logged out of your mailbox.
Saved Message Queue
Each User ID in the system has a security code. You must enter
your security code to access your mailbox. The security code
ensures the privacy of your messages, personal greetings, etc.
Security Code
The representative in your company responsible for configuring
the voice mail system and your mailbox to suit you and your
companies needs.
System Administrator
System Greeting
Pre-recorded greeting that adds your recorded name (and
extension, if required): “Please leave a message for (name).”
Can be used by any user on the voice mail system. Based on
your selection, callers hear the system greeting or a personal
greeting.
Strata CIX40 Voice Processing User Guide 07/06
79
Glossary
System List ~ User Notification
Term
Definition
Destination (distribution) list of User IDs created and
maintained by the System Administrator. Any user on the voice
mail system can use the list. When sending messages, you can
choose a User ID, personal list, system list, and/or the directory
as the destination.
System List
DTMF push-button tone dialing telephone.
Tone-dialing Telephone
Urgent Messages
Messages are marked Urgent by the sender and by default, are
played first, followed by all other messages. The System
Administrator can set a notification record to use pager
notification exclusively whenever Urgent messages are
received.
Subscriber of the mailbox, also known as a mailbox user. A
user has access to one or more User IDs in the system by
knowing the security codes. Once a user accesses his/her User
ID, he/she can play back messages, delete those messages,
send them to other User IDs, etc.
User
Number for the mailbox user, also known as a voice mailbox.
User ID/User ID Mailboxes
A user mailbox records messages from callers. A user
periodically checks the mailbox for messages, etc., or a variety
of automatic notification methods can be employed. There is
generally one mailbox for each extension, although several
mailboxes can share a single extension when multiple users
share the same telephone line.
Each User ID can have up to 10 notification records set by the
System Administrator to automatically call and notify you of
messages. You can enable/disable the notify method for each
of these records or change the notification telephone number.
User Notification
80
Strata CIX40 Voice Processing User Guide 07/06
Index
call screening 53
security code 19
your greeting 46
your user options 51
continuous
A
about this guide
related documents/media 9
delete 28
play 28
CTX Integration 68
B
play 25
reply 26
personal list 9, 35, 38, 42
system list 10, 35, 38, 42
save 25
busy greeting 7
select 56
buttons
direct transfer to voice mailbox 74
directory 34, 37, 41
extension 8
distribution lists 9, 10
do not disturb 52
C
call forward
system 65
call monitor button 75
E
exit mailbox 20
Strata CIX40 Voice Processing User Guide 07/06
81
Index
F ~ M
extension number 8
manage options 45
F
FIFO 5
forward message 6, 26, 37
manage
G
change your user options 51
getting started 13
greeting
busy 7, 55, 56
personal 7
manage mailbox 45
on 68
create 47
record over 47
review greeting 50
sample 18, 47
system 7
on another telephone 68
control
manage 63
use 64
L
LIFO 5
lists
play next 23
manage 61
play previous 23
volume 23
personal distribution 35, 38, 42
system distribution 35, 38, 42
date and time 27
destination 9
forward 6, 26, 37
future delivery 8, 27, 44
M
mailbox
access 14
82
Strata CIX40 Voice Processing User Guide 07/06
new message queue 4, 28
play 21
next message 23
reply 6, 26, 40
re-record 35
saved message queue 5, 28
send 31
pause/resume 23, 25, 38, 40
volume 23
playback controls 22
special delivery options 8
types 6
queues 4, 28
Msg button/LED 67
multiple destinations 35
R
record
N
busy greeting 55
messages
name
recording 17
new/saved messages 4, 28
append
comment 39
P
pause/resume recording 32, 35
personal
distribution list 35, 38, 42
greeting 7
review
change your selection 49
create 47
record over 47
comment 38
recording 35
reply 40
play messages 21, 24
special functions 27
playback
name 17
pause/resume 32, 35
record to voice mail 73
Strata CIX40 Voice Processing User Guide 07/06
83
Index
S ~ V
reply message 6, 26, 40
busy greeting selection 56
call screening 10, 53
return receipt request 8, 43
do not disturb 10, 52
message notification selection 11, 58
user prompts 11
S
security code 13
send messages 31
soft keys 68
voice mail conference 74
volume control 23, 25
urgent 43
continuous delete 28
continuous play 28
future delivery review 27
new/saved queue 28
system
distribution list 35, 38, 42
T
tutorial 13
user 11
U
urgent messages 8, 43
user ID 15, 34, 37, 41
user options
84
Strata CIX40 Voice Processing User Guide 07/06
|