TM
Stow-N-Go
Ultra portable
Laser mouse
specifications subject to change without notice.
© 2006 Targus Group International, Inc. and Targus, Inc.
USER GUIDE
AMU22US / 410-0795-001A
CAUTION
LASER RADIATION. DO NOT STARE INTO
THE BEAM OR VIEW DIRECTLY WITH
OPTICAL INSTRUMENTS. CLASS
PRODUCT.
I
LASER
NEVER POINT
A
LASER BEAM INTO
A
PERSON’S EYES OR VIEW A LASER BEAM
DIRECTLY, AS PROLONGED EXPOSURE CAN
BE HAZARDOUS TO THE EYES.
MOMENTARY EXPOSURE FROM A LASER
POINTER, SUCH AS AN INADVERTENT
SWEEP OF THE LIGHT ACROSS A PERSON'S
EYES, MAY CAUSE TEMPORARY FLASH
BLINDNESS SIMILAR TO THE EFFECT OF A
CAMERA FLASH BULB. ALTHOUGH THIS
CONDITION
BECOME MORE DANGEROUS IF
IS
TEMPORARY,
IT
CAN
THE
EXPOSED PERSON IS ENGAGED IN
A
VISION-CRITICAL
DRIVING.
ACTIVITY
SUCH
AS
2
TARGUS STOW-N-GO™
ULTRA-PORTABLE
LASER MOUSE
Introduction
Congratulations on your purchase of the Targus Stow-N-GoTM ultra
portable laser mouse. This mouse features a resolution changing
function for users who require more precision with different types of
applications.The attachable cable storage on the bottom of the mouse
is great for users on the go. This is a plug and play device so no
additional software is required. This mouse supports both Windows
and Macintosh platforms.
Contents
• Targus Stow-N-Go ultra-portable laser mouse
• Carrying pouch
• User Guide
System Requirements
• Operating System - Windows® 2000 / XP
• Windows VistaTM
• Mac OS 8.9 and above
• USB 1.1 or 2.0 port
3
Targus Stow-N-GoTM ultra portable laser mouse
Connecting the mouse to your
computer
1 Plug the standard USB end of the cable into an available USB port
on your computer.
2 The Found New Hardware Wizard appears. If it does not, the
operating system has installed the default driver automatically. No
other steps are necessary.
3 Click Next. The wizard searches for the appropriate device driver.
4 Click Next.
5 Click Finish to complete the driver installation.
You are now ready to use the mouse.
Selecting the Resolution
This mouse is designed with 3 user selectable resolutions: by pressing
the resolution selection button, the user can select from the available
resolutions which provide improved precision coupled with ultra-fast
speed for the different types of applications, i.e. text, CAD drawing,
detailed drawings.
• 800-dpi: default, no light
• 1,200-dpi: green LED light
• 1,600-dpi: blue LED light
Resolution
Selection
Button
LED status
Indicator
4
Targus Stow-N-GoTM ultra portable laser mouse
Fine tuning the mouse cursor speed
Due to the change in (high) resolution, the mouse may become too
sensitive and difficult to use (too fast for some users). After selecting
the suitable resolution, you can also fine tune the sensativity. This can
be adjusted in the “control panel” of the Windows operating system.
Click on Start --> Setting --> Control Panel --> Mouse
In the “mouse properties” window, locate the “pointer options” tab.
Under “motion”, use the slider to change the speed of the mouse.
Click Apply to confirm the setting.
5
Targus Stow-N-GoTM ultra portable laser mouse
Using the Cable clip
The retractable cable can be attached to the bottom of the mouse for
ease of carrying.
USB tip clip slot
attach
USB tip clip
release
Operating Instructions
To extend the cable, pull both ends of the USB cable away from the
mouse's cord wheel at the same time. Continue pulling both ends until
the cable reaches the length you want. To retract the cable, or shorten
the length, draw both ends of the USB cable slightly and quickly
release until the cable reaches the length you want or is completely
retracted. Plug the standard USB end of the cable into an available
USB port on your computer.You are now ready to use the mouse.
6
Targus Stow-N-GoTM ultra portable laser mouse
Safety Measures
Never point the optical sensor toward the face, particularly the eyes, to
avoid possible injury.
NOTE: WHILE THE MOUSE IS FUNCTIONING, LASER LIGHT IS NOT VISIBLE TO
THE NAKED EYE. BE CAREFUL NOT TO LOOK DIRECTLY INTO THE EMITTER HOLE
WHILE THE MOUSE IS ACTIVE.
Although this mouse is a Class 1 Laser Product and safe for operation,
avoid pointing the laser into the eyes or looking directly into the laser
emitter.
Any attempt to disassemble, adjust or repair the mouse may result in
exposure to laser light or other safety hazards.
Operating Hints
For optimal performance:
• Never use the mouse on a glass or mirrored surface as these
surfaces will cause the mouse to fail temporarily.
• Avoid using the mouse on surfaces with repetitive patterns, such as
printed magazine photographs, as this type of surface may cause the
mouse to respond slowly or fail temporarily.
7
Targus Stow-N-GoTM ultra portable laser mouse
Technical Support
For technical questions, please visit:
US
Australia
Email: [email protected]
Telephone: 1800-641-645
New Zealand Telephone: 0800-633-222
Product Registration
Targus recommends that you register your Targus accessory
shortly after purchasing it. Go to:
provide your full name, email address, phone number, and
company information (if applicable).
Warranty
Targus warrants this product to be free from defects in materi-
als and workmanship for one year. If your Targus accessory is
found to be defective within that time, we will promptly repair
or replace it.This warranty does not cover accidental damage,
wear and tear, or consequential or incidental loss. Under no
conditions is Targus liable for loss of, or damage to a devices
nor loss of, or damage to, programs, records, or data; nor any
consequential or incidental damages, even if Targus has been
informed of their possibility. This warranty does not affect your
statutory rights.
Regulatory Compliance
This device complies with Part 15 of the FCC Rules. Opera-
tion is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) This device must
accept any interference received, including interference that
may cause undesired operation.
8
Targus Stow-N-GoTM ultra portable laser mouse
FCC Statement
Tested to Comply
This equipment has been tested and found to comply with the limits of
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and if not installed and
used in accordance with the instructions, may cause harmful interfer-
ence to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
•Reorient or relocate the receiving antenna;
•Increase the separation between the equipment and receiver;
•Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected;
•Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not authorized by the party responsible for
compliance could void the user’s authority to operate this product.
Microsoft, Windows®, and Windows Vista™ are either registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries. All trademarks and registered trademarks are
the properties of their respective owners. All rights reserved.
9
|